answersLogoWhite

0

A standard, 55 US gallon / 44 Imperial gallon drum would lead me to believe you would have a 550 US Gallon tank.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

how much water pressure from a tank?

The water pressure from a tank depends on the height of the water column above the outlet. Generally, water pressure can be calculated using the formula: pressure (in psi) = height (in feet) × 0.434. For example, a tank with water 10 feet high would create approximately 4.34 psi of pressure at the outlet. Additionally, factors such as tank shape and outlet size can influence the actual pressure experienced.


How many kwh does it take to heat a water tank?

The energy required to heat a water tank depends on its size, the temperature of the incoming water, and the desired temperature increase. The formula to calculate the energy needed is: Energy (kWh) = Volume (liters) × Temperature Increase (°C) × 4.186 / 1000. For example, heating 200 liters of water from 10°C to 60°C requires approximately 42 kWh.


How much water pressure would you have from a gravity feed tank 10 metres high?

13.956 pounds per square inch (psi)


Can pump discharge head be negative?

When a pump is pumping water from a level that is below the pump it is called suction head. If the water to be pumped is at a level above the pump, it is positive head. The pump maybe pumping from the base of a tank to a higher level such as an elevated tank or it may be pulling water from a tank that is below the pump. The distance from the center of the pump to the top of the water level would be the foot of head. It takes 2.31 feet to make 1 P.S.I. So if it is 10 feet from the center line of the pump to the water level, you would have about 4.33 P.S.I. of head.


How much water is wasted from a dripping tap for 10 minutes?

What size tap, how much pressure, how big a drip? No way to answer without enough information.

Related Questions

What is the pressure of 2250 gallons of water in a tank size 10'x 5'x 6'?

If the height is 10' and the tank is full of water, you would have 4.33 lbs.


What wire size is needed for 60 gallon hot water tank?

10 awg


How much water can be stored in a tank of size 10 feet x 10 feet x 10 feet?

10 ft X 10 ft square tank will hold 1000 cubic feet of water or 7480.51 gallons 10 ft round tank will hold 785 cubic feet of water or 5872.207 gallons


What is the proper size for childrens drums?

Children's drums are sized at about a 10 inch diameter, much smaller than the standard size for drums. This can allow a child to work a full drum set without reaching far.


How much does a frog tank cost?

Depends on the size of the tank. a small 10 gallon is 10-20 $.


What size brake drums are on your 1993 Ranger 2 wheel drive?

You could have either 9 inch or 10 inch brake drums


How often can i change my fish tank water?

It is generally recommended to perform a 10-20% water change in your fish tank once a week. However, the frequency could vary depending on the size of the tank, the number of fish, and the stability of the water parameters. Testing the water regularly can help determine the appropriate water change schedule for your specific tank.


What is the ideal tank size for tetras and how big of a tank do tetras need to thrive?

Tetras thrive in a tank that is at least 10 gallons in size, but ideally, a tank size of 20 gallons or larger is recommended for them to thrive.


What size is the fuel tank in a 1994 Geo Metro?

I believe that it is a 10 gallon tank.


Gas tank size of 2001 Chevy Metro?

most commonly an 8 to 10 gallen tank most commonly an 8 to 10 gallen tank


What size gas tank in a geo prizm 1992?

Probably 10 gallons (I own a 1996 Prizm with a 10 gallon tank).


How often do you change your 3 gallon fish tank?

10% water changes every week and 25% water changes every month is standard for all size tanks.