0
What else can I help you with?
What size PVC pipe do you use for the main drain line out of your house to the street?
Most of the time it is 4 inch.
What pipe has the smallest id schedule 40 schedule 80 or schedule 160?
For a given pipe size, schedule 160 would have the smallest ID (and thicker wall). Wall thickness and pressure rating goes up with increasing schedule number, causing the ID to go down with increasing schedule number.
Do you have to run suction line the same size from coil to to condenser?
Proper pipe sizing is in the installation manual. The piping should be one continuous run of the same size.
How do you cap a line?
Screw a proper size end cap from your local hardware store onto the pipe and use thread sealer. Go to your local hardware store and purchase a cap that fits that size line. Use a sealant on the threads.
What is pipe bore?
Pipe bore is the actual minimum inside diameter of a pipe, which is not necessarily the nominal pipe size.
What size pipe should be the smallest pipe you use for waste in a commercial building?
1 1/4", only for the basin trap arm
What size of pipe for 300 ft of sewer line?
I would use 3 inch for that.
How thickness of underground and above ground piping is evaluated in cross country pipe line?
Sizing of the line is an important study and calls for a techno-economic analysis. The various parameters that affect line size are:* Pressure: High pressure will reduce the pipe size, but will increase the pipe thickness* Size of the pipe: The bigger the pipe, the higher the cost* Thickness: Various factors affect the pipe thickness. E.g. Soil cover with the line having internal pressure/line in empty condition but having external soil pressure etc* Pipe material* Booster stations: How many booster stations will be there along the route? If the fluid pressure is low, the thickness decreases, but we need more booster stations and the reverse is the case if the fluid pressure is high* Pipe fabrication: Manufactured pipe versus roll-and-weld pipe* Buoyancy effect: Under-soil or underwater pipeline gets lifted up
On a single line pipe drawing what two methods of measurement would be found?
On a single line pipe drawing, you would typically find two methods of measurement: nominal pipe size (NPS) or diameter in inches, which indicates the pipe's size, and the schedule number, which specifies the wall thickness and pressure rating of the pipe. Additionally, annotations for lengths and fittings may be included to provide further information on the system layout.
What is a inch size of a pipe?
The distance between the inside edge of two points in a direct line measured inside of any pipe whether, metal, plastic or PVC.
What size PVC pipe do you use for the main drain line out of your house to the street?
Most of the time it is 4 inch.
What size of drain do you need if you tie 2 bathroom sinks into 1 drain line?
a 3 inch pipe
What pipe has the smallest id schedule 40 schedule 80 or schedule 160?
For a given pipe size, schedule 160 would have the smallest ID (and thicker wall). Wall thickness and pressure rating goes up with increasing schedule number, causing the ID to go down with increasing schedule number.
What is the smallest size gauge?
20gauge piercings are the smallest common size.
What is the size of smallest cell?
The smallest cell is about 8 microns in size.
What is the smallest cell size?
The smallest cell is about 8 microns in size.
Which atom is the smallest in size?
The atom that is smallest in size is the hydrogen atom.
