0
The system bus frequency of a 1066FSB (Front Side Bus) is effectively 266 MHz. This is because the FSB speed is typically calculated as the data rate, which is four times the base clock frequency due to the quad-pumped nature of the bus. Therefore, while the FSB is labeled as 1066 MT/s (megatransfers per second), the actual clock frequency is 266 MHz.
What else can I help you with?
Difference between Bus Clock and System Clock in Microcontrollers?
Bus Clock is based on the System Clock. In other terms Bus Clock is derived from system Clock. Bus Clock is usually half System Clock. (Busy Clock = System Clock / 2)
What is the difference between resonance and resonant frequency?
resonance is the behavior of resonant frequency while resonant frequency is the cause of it. There are basically two types of resonance; Electrical and Magnetic. Resonant frequency is that particular frequency for a system for which the system performs its best. while the system at that particular situation can be called the system at resonance
What is the deviation ratio for frequency modulation?
Deviation ratio: In a frequency modulation system, the ratio of the maximum frequency deviation of the carrier to the maximum modulating frequency of the system under specified conditions
What is swing bus-bar?
A swing bus-bar, often referred to as a swing bus, is a component in electrical power systems that helps maintain the stability of the network by balancing power flow. It acts as a reference point for voltage and frequency, allowing for the adjustment of loads and generation in response to fluctuations in demand. In a power grid, the swing bus is typically used to manage the supply from generators and ensure that the system operates within safe limits. Its primary function is to provide a flexible point for managing power distribution and enhancing system reliability.
Name three types of buses that are likely to be on a motherboard today?
data bus, system bus and host bus.
What is the system bus and frequency called?
Front Bus and 1600
If you multiply the system bus frequency by the multiplier you get the?
processor frequency
If you multiply the system bus frequency by the multiplier you get what?
processor frequency
What is the mesurement of frequency of a system bus?
The frequency of a system bus is measured in Hz. Modern computer system buses operate at hundreds of MHz or at GHz.
What is a measurement of frequency of a bus and cpu?
A system bus frequency is 1600 MHz. A CPU frequency is 166 MHz to almost 4GHz.
If you multiply the system bus frequency by the multiplier what can you get?
processor frequency ~tekno
What 2 factors determine the frequency of the CPU?
System bus frequency and multiplier
What is the common frequency of a system bus on the motherboard?
There is no "common" frequency. As new technology develops, the speed of the front side bus and newer system buses continuously increases.
What is the measurement of frequency of a system bus?
Frequency is measured in Hertz, or cycles per second.
What is the frequency of a system bus?
it depends on the CPU.. but the frequency is measured in herts
What do you get if you multiply the system bus frequency by the multiplier?
You end up with the advertised/effective CPU speed, such as 2.8GHz.
What is a measurement of frequency of a system bus and CPU. which is faster the system bus or CPU?
CPU operates from 166 MHz to more than 3 GHz system can operate from 133 MHz to 400 MHz. CPU is faster than the system bus
