BS 4360 50D is a specification for structural steel that has a minimum yield strength of 50 ksi. Equivalent materials include S355J2 in the European standard EN 10025 and ASTM A572 Grade 50 in the American standard. Both of these alternatives offer similar mechanical properties and are commonly used in construction and structural applications. Always consult the relevant standards and specifications for specific applications and compliance.
Carburize (Materials) BS 4360 43C is a structural grade like ASTM A 36 but with guranteed charpy properties:C .19 max, Si .5 max, Mn 1.5 maxUTS 62,400 psiYield Strength depends on thickness but up to 1.5-inch would be 35,000 psiCharpy impact tested at 0 degrees C (-32 Degrees F)minimum average impact toughness 27 J (20 ft lb)
Yes. BS 6651 has been replaced by BS EN 62305.
BS1452 grade 200 is a cast iron grade with a tensile of 200 N/mm2. I have checked on my iron data base and can find no Indian equivalent to this specification. In the UK most stockists hold grade BS1452 grade 250 and with the slightly higher tensile it is commonly used as a suitable alternative to grade 200. I found further information on Cast Iron Specifications at the 'related link page'.
The ASTM equivalent of BS 1449 Grade HS 14 is typically ASTM A572 Grade 50. Both specifications refer to high-strength structural steel, with ASTM A572 Grade 50 offering similar mechanical properties and yield strength. However, it's essential to verify specific requirements, as there may be variations in chemical composition and other properties. Always consult the latest standards for precise comparisons.
The equivalent to BS 4360 Grade 43A in Indian Standard is IS 2062. Both standards specify general construction steel grades with similar chemical composition and mechanical properties.
Astm a36
BS 3692 is not a grade...it refers to the name of British standard BS 3692 which contains the specifications of ISO metric precision hexagon bolts, screws and nuts. In this standard and other BS bolt standards, bolts are categorized into groups called grades such as grade 4.6 & 8.8... Example: Grade 4.6 : The first number (4) refers to 0.01 of minimum tensile strength of bolt (4/0.01=400n/mm2). This second number ( 6) refers to 10 times of the ratio between minimum yield strength and minimum tensile strength (yield strength/400=0.6 hence, yield strength =400X0.6=240) Hope this helps... Mohammed
Carburize (Materials) BS 4360 43C is a structural grade like ASTM A 36 but with guranteed charpy properties:C .19 max, Si .5 max, Mn 1.5 maxUTS 62,400 psiYield Strength depends on thickness but up to 1.5-inch would be 35,000 psiCharpy impact tested at 0 degrees C (-32 Degrees F)minimum average impact toughness 27 J (20 ft lb)
A. R. Fewell has written: 'The determination of softwood strength properties for grades, strength classes and laminated timber for BS 5268:Part2'
Weapon Skill (WS) Ballistic Skill (BS) Strength(S) Toughness (T) Wounds (W) Initiative (I) Attacks (A) Leadership (Ld) Armor Save (Sv)
bs it best or bs physics
MAPUA INSTITUTE OF TECHNOLOGY- first ABET accredited school in the PhilippinesAccredited ProgramsEngineeringChemical Engineering (BS ChE)Civil Engineering (BS CE)Computer Engineering (BS CpE)Electrical Engineering (BS EE)Electronics Engineering (BS ECE)Environmental and Sanitary Engineering (BS EnSE)Industrial Engineering (BS IE)Mechanical Engineering (BS ME)ComputingComputer Science (BS CS)Information Technology (BS IT)TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES- Second ABET accredited school in the PhilippinesAccredited ProgramsTIP QUEZON CITY TIP MANILAEngineering EngineeringComputer Engineering (BS CpE) Chemical Engineering (BS ChE)Electrical Engineering (BS EE) Computer Engineering (BS CpE)Electronic Engineering (BS ECE) Electrical Engineering (BS EE)Industrial Engineering (BS IE) Electronics Engineering (BS ECE)Mechanical Engineering (BS ME) Industrial Engineering (BS IE)Sanitary Engineering (BS SE) Mechanical Engineering (BS ME)Computing ComputingComputer Science (BS CS) Computer Science (BS CS)Information System (BS IS) Information System (BS IS)Information Technology (BS IT) Information Technology (BS IT)
4years
bs from iisc
No, butterfly valves manufactured to BS 5155 and BS EN 593 are not the same. BS 5155 is a British standard for butterfly valves while BS EN 593 is a European standard. Both standards have different requirements and specifications for the design, performance, and testing of butterfly valves.
BS