3.04kg/mtr for 32mm(M) also used as riser pipes for Hand Pump Mark-II
150
150nb
For design consideration Reinforced concrete is 150 lbs/ft^3. Unreinforced is around 145 lbs/ft^3. That comes out to 2402.77 kg/m^3 and 2322.68 kg/m^3 respectfully
150×10=1500 1500×8.96=13440 ÷1000 kg/meter 13.440
2000 to 2500 Kg/cubic meter depending upon the grade of concrete
150
150 kg is a unit of weight equal to 150 kilograms. In pounds, this would be approximately 330.7 lbs.
16.4 kgs per mtr
unit weight= weight/volume.unit weight of normal concrete = 24 MPaIt is also known as density of concrete
The unit weight of machine sand typically ranges from about 100-150 pounds per cubic foot, depending on factors such as moisture content and compaction.
The unit weight of a brick can vary depending on its size, material composition, and manufacturing process. On average, the unit weight of a standard brick commonly used in construction can range from 100 to 150 pounds per cubic foot.
C = pi * diameter Diameter = C / pi Diameter = 150 / 3.14 Diameter = 47.7 inches
== == REPLACE ONLY WITH FLEXPIPE - MUST BE WELDED IN - USUALLY AROUND $100-150 AT A MUFFLER SHOP.
The average weight of concrete is 150 lb per cubic foot. However, lightweight concrete can weigh as little as 50 lb/ft3 and special mix designs (like those used in nuclear power plants) can weigh up to 400 lb/ft3.
To calculate the weight of structural steel, you can use the formula: weight = volume × density. First, calculate the volume of the steel by multiplying its length, width, and height. Then, multiply the volume by the density of the specific type of structural steel being used to determine the weight.
In lbs unit of measurement: One Ton equals 2,000 lbs, so 2,000 lbs X 150 Tons = 300,000 lbs : )
300,00