answersLogoWhite

0

The volume of a sack of concrete mix typically varies based on the size of the bag. A standard 80-pound (36.3 kg) bag of concrete mix generally yields about 0.6 cubic feet (approximately 0.017 cubic meters) when mixed with water. Smaller bags, such as 60-pound (27.2 kg) bags, yield about 0.45 cubic feet (approximately 0.013 cubic meters). Always check the specific product label for precise volume yield.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

What is the psi of 6 sack concrete mix?

4500


A six sack of concrete mix has how much cement in it?

The answer is, remarkably, 6. Answer: "6 sack" or "6 bag mix" has six bags of cement per cubic yard of concrete mix. Since each sack/bag contains 94 lbs of dry cement, this equals 564 lbs of cement per cubic yard of concrete.


How much 94 lb. bags of cement in a yard?

4&1/2 sack type 1 type 2 mix is quite standard in the industry but 5 sack mix is very common also. the higher the sack mix the greater the concrete breaking strength.


What is the cement content in the different grades of concrete?

It depends on the strength you need. The content is measured in sacks (94lbs per sack) per cubic yard. example: 5.5 sack mix = 5.5 sacks per cu.yd. shich is about a 2500-3000 lb mix.


How many sack of sand gravel in 1 sack of cement?

The typical mix for concrete often uses a ratio of 1 part cement to 3 parts sand and gravel. Therefore, for every sack of cement, you would typically use about 3 sacks of sand and gravel combined. However, the exact amount can vary based on the specific mix design and the desired strength of the concrete. Always refer to specific guidelines for your project for the best results.


What material ratio is in one cubic foot of concrete?

There are different concrete mixes and the will depend on which mix it is. The material ratio will remain the same whatever the volume is.


How to measure how much concrete do you need for your project?

To measure how much concrete you need for your project, calculate the volume of the area to be filled with concrete by multiplying the length, width, and height. Then, divide the total volume by the yield of the concrete mix to determine the amount needed in cubic yards or cubic meters.


What PSI is 5 Sack concrete?

5 sacks of cement per 1 yard of concrete


What is the difference between leAn concrete and ready mix concrete?

Lean mix concrete is used for substructures like foundations,piles,etc.,Ready mix concrete is used for superstructures and also for mass construction.Generally, quality of ready mix concrete is good when compared to the lean mix concrete.Workability of lean mix concrete is high when compared to RMC.


What is ultimate 28 day concrete strength?

The strength of concrete on the 28th day is considered full strength with regard to the engineering calculations for its use. Concrete continues to get hard for 100 years or more, as long as it has water on it now and then. For a 6-sack concrete mix, its 28 day compressive strength should be at 4,000 psi or greater.


How do you adjust the density of a concrete mix?

With a fixed amount of cement in a unit volume of concrete, the strongest and most impermeable concrete is one that has the greatest density, i.e., which in a given unit volume has the largest percentage of solid materials. The use of the absolute minimum quantity of water required for proper placement ensures the greatest strength from the concrete.


What is the volume of 1Kg of concrete?

The volume of concrete varies depending on its density. On average, 1 kg of concrete has a volume of about 0.00035 cubic meters.