answersLogoWhite

0

when dealing with bit, there are only 2 bits which are '0' and '1'. when the current bit is '0', if we toggle this bit, it will become '1' and when the current bit is '1', if we toggle this bit, it will become '0' that is

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Which element below can act as a toggle?

A toggle switch, typically a mechanical or electronic component, can act as a toggle by altering between two states, such as on and off.


What a toggle?

A toggle is a metal or wooden pin or rod, or similar, which helps you to secure things.


What is the word toggle plural?

The noun toggle is the singular form; the plural form is toggles.


Why T filp flop is called toggle flip flop?

Because 'T' stands for 'Toggle'


How do you sew on toggle buttons?

The way to sew on a toggle button is to first pin the toggle button in place on the jacket. Next, take a threaded needle and knot it tightly. Insert the threaded needle through the loop in the toggle at least four or five times, securing the know underneath the fabric. Tie and knot and the toggle should be in place.


What is the maximum weight capacity that toggle bolts can hold?

Toggle bolts can typically hold a maximum weight capacity of 50 to 100 pounds, depending on the size and type of the toggle bolt.


How do I install toggle bolts properly?

To install toggle bolts properly, first drill a hole in the wall, insert the toggle bolt through the hole, then tighten the bolt until it is secure. Make sure the toggle wings open up behind the wall to provide strong support.


How to use toggle bolts in drywall for hanging heavy objects securely?

To use toggle bolts in drywall for hanging heavy objects securely, first drill a hole in the drywall. Insert the toggle bolt through the hole and tighten it until it is secure. Then, attach the object to the toggle bolt using the provided hardware. Make sure the toggle bolt is rated for the weight of the object you are hanging.


How would you wire a toggle switch for your starter in a 1977 Chevy truck?

you can just use a toggle switch,,,you need a relay capable of the amps it takes for the starter.it would connect between the starter and the battery,then you would need a toggle switch preferably a momatary toggle switch to activate the relay.


How to use toggle anchors effectively for securing heavy objects to drywall?

To use toggle anchors effectively for securing heavy objects to drywall, follow these steps: Choose the right size toggle anchor for the weight of the object. Drill a hole in the drywall where you want to hang the object. Insert the toggle anchor into the hole and tighten it until it is secure. Attach the object to the toggle anchor using the provided screws. Make sure the toggle anchor is securely fastened before hanging the heavy object. By following these steps, you can effectively use toggle anchors to secure heavy objects to drywall.


What does a toggle switch do?

Toggle = back and forth, or on and off. A toggle switch toggles (turns) a light or other device on or off. Good example is a light switch (the wall kind)-- a toggle switch must also be of the "throw the stick back and forth" kind. Which a light switch basically is.


How do you replace window toggle switch 1999 Buick century?

how to replace window toggle switch 1999 buick century