0
What else can I help you with?
What is the use of series and parallel resonance?
Series resonant circuits have their lowest impedance at the resonant frequency. Parallel resonant circuits have their highest impedance at the resonant frequency. This characteristic is exploited in the design of filters, oscillators and other circuits.
Series resonance circuit is also known as acceptor circuit why?
Because the series resonant circuit has the lowest possible impedance at resonance frequency, thus allowing the AC current to circulate through it. At resonance frequency, XC=XL and XL-XC = 0. Therefore, the only electrical characteristic left in the circuit to oppose current is the internal resistance of the two components. Hence, at resonance frequency, Z = R. Note: This effect is probably better seen with vectors. Clarification: Resonant circuits come in two flavors, series and parallel. Series resonant circuits do have an impedance equal to zero at the resonant frequency. This characteristic makes series resonant circuits especially well suited to be used as basic pass-band filters (acceptors). However, parallel circuits present their maximum impedance at the resonant frequency, which makes them ideal for tuning purposes.
What is the Difference between the crest and trough?
wave height. -- The highest point of a wave is known as its crest while the trough is the lowest point of the wave. Wavelength is the horizontal distance between successive crests or troughs. by: Claire O.
What is the lowest subscript of an array in c plus plus?
The lowest subscript of an array in C, or C++ is 0.
What is the lowest power output?
The lowest power output is typically considered to be zero watts, which occurs when a device is not consuming or producing any energy. In practical terms, the minimum power output of a functioning device depends on its design and purpose, but it can be infinitesimally small, approaching but not reaching zero. For example, some electronic devices can operate at very low power levels, such as milliwatts or microwatts.
What are memory sockets?
Most motherboards today come with between 2 and 8 sockets for the insertion of memory. These are usually either SIMMs (single inline memory modules) or DIMMs (dual inline memory modules). These can come in different sizes. The motherboard usually labels these sockets "SIMM0" through "SIMM7" or "DIMM1" through "DIMM3", etc. The sockets are almost always filled starting with the lowest numbered socket first. Most Pentium class or higher motherboards require SIMMs to be inserted in pairs, but DIMMs may be inserted individually.
What is the lowest the spring tide can get?
The lowest point of a spring tide occurs during the neap tide phase, which is when the difference between high and low tide is the smallest. This typically happens about a week after the spring tide.
What day of the week typically offers the lowest airfare prices for flights?
Typically, Tuesdays offer the lowest airfare prices for flights.
What is unique lowest number between 01 to 300?
01 is the lowest.
What is the lowest note that a baritone singer can typically reach?
The lowest note that a baritone singer can typically reach is around the G2 note on the piano.
Where is the lowest air pressure typically found within a hurricane?
The lowest air pressure in a hurricane is typically found at the center of the storm, known as the eye.
What state has the smallest spread between highest and lowest temps?
Hawaii has the smallest spread between highest and lowest temps.
What is the difference between the lowest temperatures?
The difference between the lowest temperatures refers to the numerical value that represents the interval between the two lowest recorded temperatures. It is the result of subtracting the lower temperature from the other to determine their difference.
What is the lowest power of a microscope?
The lowest power of a microscope is typically 4x, known as the scanning objective lens.
What is the lowest type of cloud in the sky?
The lowest type of cloud in the sky is typically stratus clouds. These clouds often appear as a uniform layer that can cover the entire sky, creating overcast conditions. Stratus clouds are usually found between the surface and about 6,500 feet in altitude.
What is a relief on a topographic map?
The relief is the difference between the highest and lowest contour line.
What is the lowest multiple of 50 and 85?
The lowest common multiple between 50 and 85 is 850.
