0
By connecting the ends of a 10K trimmer potentiometer to the two pins( 1 and 8 of an 8 pin dip OP Amp) and the slider to -supply rail it is possible to null the output to exactly 0 volts. This might be important in a DC coupled amp like a servo driver. Otherwise these pins can be left open.
What else can I help you with?
WHAT are the pins in IC 741?
The LM741 pins depends on the particular package selected. The most common arrangement is... 1.) Offset Null 2.) Inverting Input 3.) Non-Inverting Input 4.) Supply Voltage Minus 5.) Offset Null 6.) Output 7.) Supply Voltage Plus 8.) No Connection This is true for both the 8 pin metal can and the 8 pin DIP. Typical connection is to connect a 10K potentiometer between the two offset nulls with the wiper connected to Supply Voltage Minus.
Is it possible to have an odd pin ic and if not then why ic having only even number of pins exist?
for simplicity of calculation of no of pins
What do you mean by Vcc pin and ground pin of an IC?
these two pins are biasing pins of ICs.
How many pins in IC 8086?
it have 40 pins 1st one is ground and last one is Vcc. Itplh = 450
What is the use of 7 and 4 pin in IC741?
power supplies +5v and -5v will be given to 7 and 4 pins respectively,therefore it is used for giving power suppply to ic 741
WHAT are the pins in IC 741?
The LM741 pins depends on the particular package selected. The most common arrangement is... 1.) Offset Null 2.) Inverting Input 3.) Non-Inverting Input 4.) Supply Voltage Minus 5.) Offset Null 6.) Output 7.) Supply Voltage Plus 8.) No Connection This is true for both the 8 pin metal can and the 8 pin DIP. Typical connection is to connect a 10K potentiometer between the two offset nulls with the wiper connected to Supply Voltage Minus.
What is the pin configuration of IC CA3130?
The CA3130 op amp has the following pinouts: 1 Offset null 2 Inv. input 3 Non-inv. input 4 V- and case 5 Offset null 6 Output 7 V+ 8 Strobe Use the link below to review a data sheet where you'll find more information than you can possibly use.
Is it possible to have an odd pin ic and if not then why ic having only even number of pins exist?
for simplicity of calculation of no of pins
How many pins of IC NE555?
The 555 has 8 pins...GroundTriggerOutputResetControlThresholdDischargeVcc
How many pin IC 8086 is?
40 PINS
How many pins does a 7805 IC have?
The 7805 regulator IC has three pins; input, output, and ground. The case is also a pin, but it is grounded, so there are still only three pins, for all practical purposes.
How do you identify pin 1 on an IC?
IC pins are numbered anti-clockwise around the IC starting near the notch or dot.
What do you mean by Vcc pin and ground pin of an IC?
these two pins are biasing pins of ICs.
Why to have even number of pins in ic?
to avoid floating pins ...........so as to avoid rail to rail current
Which are non inverting pins of ic LM 393?
The non-inverting pins of the LM393 are 3 and 5.
IC 741 is an?
It is an opamp chip consisting of 8 pins
How many pins in IC 8086?
it have 40 pins 1st one is ground and last one is Vcc. Itplh = 450
