I would use copper but it really doesn't matter. You can use what you are comfortable with.
"Shower plumbing will vary greatly in cost depending on wether you are installing a new shower system, refurbishing an older system, planning to add upgraded features and fixtures, and if there will be tiling involved."
the pipes dont need to be replaced, but your condenser should match the system. although, if your pipes are very old, they may be leaky, and new ones would make it more efficient
You Can but typically the pipe for the shower head that is coming out of the wall is just a short piece of pipe that you should be able to remove easily enough by unscrewing it. Then you can just replace that piece with a new one. == Answer== Do the same as above but make sure your shower arm is not floppy, if it is you could tear up the riser coming to the arm. Be very carefull.
Installing software is more like adding a new software on your machine. Upgrading is updating your existing software to a newer version.
One would need to use floor liners when installing new floors to prevent dirt, snow, sand and many other unwanted debris to deform sink under the floor and deform it.
The steps involved in installing a shower valve replacement kit are: shutting off the water supply, removing the old valve, cleaning the area, installing the new valve, connecting the pipes, testing for leaks, and sealing the area.
To remove old shower pipes to install a new shower faucet, turn the main water off first. Then either cut the pipes at the joints or unscrew the washers holding the pipes together.
To improve water pressure in your shower, you can try cleaning the showerhead, checking for any clogs in the pipes, adjusting the pressure regulator, or installing a new showerhead designed for higher pressure.
To increase water pressure in your shower head, you can try cleaning the shower head to remove any mineral deposits, checking for any clogs in the pipes, adjusting the water pressure regulator, or installing a new shower head designed for higher pressure.
The steps involved in a shower valve replacement typically include shutting off the water supply, removing the old valve, installing the new valve, connecting the pipes, testing for leaks, and sealing the area.
The steps involved in shower plumbing installation include: shutting off water supply, removing old fixtures, installing new pipes and fittings, securing the shower valve, connecting the water supply lines, testing for leaks, and sealing joints with caulk.
To effectively use Teflon tape when installing a new shower head, wrap the tape around the threads of the shower arm in a clockwise direction. This will help create a tight seal and prevent leaks when attaching the new shower head.
If it is indoors and not a recessed shower, you may have a leaking shower pan.
Repairing or replacing shower pipes in the wall involves cutting out the damaged section of pipe, removing it, and installing a new pipe in its place. This process may require cutting into the wall to access the pipes, so it's important to turn off the water supply before starting. It's recommended to consult a professional plumber for this task to ensure it is done correctly and safely.
To increase shower water pressure in your bathroom, you can try cleaning the showerhead to remove any mineral deposits, checking for any clogs in the pipes, adjusting the water pressure regulator, or installing a new showerhead designed for higher pressure.
A leaking shower valve by installing a new cartridge.
If your shower handle is stripped, you should consider replacing it with a new one. This can usually be done by removing the old handle and installing a new one following the manufacturer's instructions. If you are not comfortable doing this yourself, you may want to contact a professional plumber for assistance.