0
What else can I help you with?
Method of laying cement concrete road?
6'' thick sand filling, then 9'' thick plain cement concrete 1:4:8 [ ratio] then top layer of Plain cement concrete 1:1.5:3 mixed with concrete mixer. proper vibrator should be used. expansion joint should be after 2.5mts to 3mts alternatively of 12 mm wide and filled with the mixer of hot bitumen sand mixed. by: m.s.chaudhary [civil engineer]
How should cement be placed into an indirect restoration for delivery?
Cement should be placed into an indirect restoration by first ensuring the internal surface of the restoration is clean and dry. The appropriate cement is then evenly applied to the internal surface, using a small spatula or applicator to achieve a uniform layer. It's important to avoid overfilling, as excess cement can lead to complications during seating. Finally, the restoration is carefully positioned onto the prepared tooth structure, ensuring proper alignment before applying gentle pressure to seat it fully.
Should a sidewalk be made of cement or concrete?
Concrete is what you make a sidewalk from. To make concrete, you mix Portland cement, sand, gravel (aggregate) and water. The cement holds the aggregate together.
Why should masonry cement never be used for concrete?
penis
Should sponge rubber carpet pad be stapled or glued?
Gluing splices is the common way to lay pad for carpet.
Should you remove carpet glue from plywood before laying ceramic tile in sunroom?
If the carpet glue is dense enough to affect your tile cement then you should remove it by sanding. -If it's only sparse then it won't matter.
Should i install a cement back board over a wooden floor before laying ceramic tiles?
I would get advice from a professional. I suspect that the cement backed board (plaster board?) would crack and turn to powder under the flexing as people walk across the floor.
How long should you wait after neutralizing the carpet before you add the dye the carpet?
3 hours man
Field test of cement?
The field test of cement are 1.Insert the hand in cement bag,one should feel cool. 2.Rub the cement between fingers,one should feel silky 3.Through handfull of cement in a bucket of water it should float before it sinks.
How long should I wait before grouting tile?
You should wait 24 to 72 hours after laying the tile before grouting.
When should you start laying off people from your business?
before you cant afford to pay them
Do you need to vacuum before carpet cleaning?
Yes, always vacuum first! The carpet should be vacuumed thoroughly with a regular household vacuum cleaner, before starting to clean it with a steam carpet washer or cleaner. It will also fluff the carpet fibers, loosening deep down dirt from within.
How long does it take a carpet to dry after performing your own carpet shampooing on it?
You should allow your carpet to dry at least 24 hours before stepping on it. Some carpets take longer to dry.
How long should I wait before plugging in my fridge after laying it down?
After laying down a fridge, it is recommended to wait at least 4 hours before plugging it in to allow the refrigerant to settle back into place.
What should I know before renting a carpet shampooer?
Before renting a carpet shampooer you should know what kind of chemicals the one you are renting takes. You should also be sure to read the fine print of the contract to make sure you know what you are paying for and what to expect from the machine that you are renting.
Should Portland cement be capitalized?
According to the Portland Cement Association, portland cement should not be capitalized.
Can you glue down carpet pad?
Yes and it is common when pad is being placed onto a cement substrate. It should be noted that when pad is glued, removing it later can be a very messy job.
