0
What else can I help you with?
What does a machine shop supervisor do?
Initially he must have a knowledge on planning is required
What are the 7 standard machine tools found in machine shop?
Some of the different types of machine tools that can be found in a machine shop are:Center latheMilling machineShaperHorizontal boring millVertical boring millRadial arm drillSlotting machineCylindrical grinderGear grinder and Gear shaperVarious types of CNC: Lathe, machine center, milling machine, etc.
What is the difference between assembly drawing and detail drawing?
Shop drawings usually refer to drawings made by an engineer and distributed to the shop floor to be used by the fabricators. An as built drawing can mean one of three things. A) As built commonly refers to an item that will have a mirror or opposite part, and is usually labeled as Right or Left Hand, or Opposite Side. In this case AS DRAWN or AS BUILT means the fabricator is to make the part just like the drawing. Often these drawings are enlargements of sections of another drawing. B) The drawing is made during the building process. This would occur during custom building or prototype stage of manufacture. These drawings would then be sent to the engineer for finalization, assuming they work. C) The drawing is made from an existing sample part or product, sometimes by the engineer and sometimes by the people on the shop floor.
Is Number and variety of machines in the shop relevant to job shop scheduling?
Yes. Obviously, you have to tailor the schedule to the resources available, both human and machine, or you need to change those resources if the schedule cannot be changed.
What length of antenna?
unlimited most radio supply outfits will provide an antenna mast to 78 inches, but you can get your machine shop to make a longer mast for a few $$$ extra
What kind of simple machine that rube made is the rake in how to keep shop windows clean?
Rube Goldberg created a complex machine, known as a Rube Goldberg machine, that performs a simple task in a convoluted way. In this context, the rake in "How to Keep Shop Windows Clean" is likely just a regular garden rake, which is a simple machine categorized as a lever.
What type of simple machine is the rake in How do you keep the shop windows clean?
The rake is a type of simple machine known as a lever. It allows the shop owner to easily collect debris and leaves by using a lever action to lift and gather the material into a pile.
When was Machine Shop Recordings created?
Machine Shop Recordings was created in 2004.
When was Modern Machine Shop created?
Modern Machine Shop was created in 1928.
What make a Chevy S-10 2003 shake when you break?
Probably warped rotors. You can have them turned down at a machine shop but for what that would cost you may as well replace them with new ones.
When was Live at the Machine Shop created?
Live at the Machine Shop was created on 2012-03-26.
Where are cnc machine shops in midwest USA?
I would suggest the following: www.emachineshop.com/, www.acmanufacturing.com/, www.ancoprecision.com/, andwww.turntecmfg.com/premier-cnc-machine-shop/.
Why machine shop is necessary in engineering field?
The machine shop is needed to physically repair and make products.
How do you remove a chunk of tile and mortor from a toilet drain?
Heavy duty shop vac. If it was not over 2 in. don't worry about it, if it is in a 3 in. or 4 in. drain. If it is bigger than that and the shop vac. will not get it, then get sewer machine and send it down from your stool opening at push it all the way to the main sewer. I would let a plumber do the sewer machine though.
When was C. E. Lipe Machine Shop created?
C. E. Lipe Machine Shop was created in 1880.
Where would one shop for a Tennis Tutor ball machine?
There are several places a person could shop for a Tennis Tutor ball machine. Online sites such as tennis warehouse, and sites like ebay would both have Tennis Tutor ball machines for sale.
How can you tell if your head gasket broke or your head is cracked?
You would remove the head(s), take the head(s) to a machine shop to be tested for cracks, the head(s) would be repaired, rebuilt or replaced depending on results. If no cracks are found by the machine shop you would reinstall head(s) with new gaskets.
