0
What else can I help you with?
What size cable required for3 phase 128 watt?
To answer this question a voltage is needed.
Transformer 208 volt primary and 480 volt secondary three phase 75 kva what size fuses on primar and secondary?
200 and 100
What generator size is needed for 0.5 hp 220 volt 1 phase?
The generator should be about ¾ hp.
What is the formula of 2 phase power?
The formula which are needed for making of a single phase transformeri.e o/p voltage,watt,current,turn,core size,coil number,bobin size etc
How do you size a phase converter to run a 3 phase welder?
From the nameplate on the welder you find the amperage that the welder draws at the three phase voltage that you are going to use. This amperage is used to size the phase converter. This amperage is also used to size the breaker that will feed the phase converter and wire size for the installation.
What size of a disconnect should use if each leg is pulling 12 amps?
A 30 amp disconnect will be suffice for the project. If the project is single phase then a two pole will be used and likewise if the project is three phase then a three pole disconnect will be used.
What size cable required for3 phase 128 watt?
To answer this question a voltage is needed.
Transformer 208 volt primary and 480 volt secondary three phase 75 kva what size fuses on primar and secondary?
200 and 100
What size tech cable for 480 feet 100 amp?
This is a voltage drop to establish wire size question. For a correct answer to this question two values are needed. One value needed is the voltage and the other is whether it is three phase or a single phase installation.
Fuse map needed for a 2004 Jetta to identify what size fuses to install for the missing high beams?
Go to Autorepair.com
What generator size is needed for 0.5 hp 220 volt 1 phase?
The generator should be about ¾ hp.
What amps are the fuses?
Fuse SizesThe Amperage ratings [sizing] of fuses [and circuit breakers] is determined by the SIZE of the conductors [wires] in the circuit which they serve.The size of the wires is determined by the maximum expected current [measured in Amperes (Amps) or Milliamps (mA] needed by the electrical devices "fed" by the circuit.Therefore, the answer to your question is that there are many different "size" fuses which range in Amperage from thousandths of an Amp to hundreds of Amps.
What is the formula of 2 phase power?
The formula which are needed for making of a single phase transformeri.e o/p voltage,watt,current,turn,core size,coil number,bobin size etc
What size wire do you need for a 208 volt 3 phase load that draws 10.5 amps?
The size of conductor needed will be a #14. It should be copper and have an insulation factor of 90 degrees C. The fact that it is a three phase load does not enter into the calculation of the wire size.
What kind of fuses are used in a 1991 Chevrolet Caprice?
normal size blade fuses
How do you size a phase converter to run a 3 phase welder?
From the nameplate on the welder you find the amperage that the welder draws at the three phase voltage that you are going to use. This amperage is used to size the phase converter. This amperage is also used to size the breaker that will feed the phase converter and wire size for the installation.
What size fuses does 2011 Ford Escape take?
It takes the size it needs.
