0
Water lines are sized by the number of fixtures, not the distance from the meter to the house. PVC pipe is cheaper and more flexible. Copper pipe will last longer, but costs a lot more. I would suggest using inch and a quarter Schedule 80 PVC pipe for the water line from the meter to the house. This will give you the volume you need. Schedule 80 fittings are a lot stronger than Schedule 40. The fittings are the weakest link when it comes to PVC pipe. Copper has a tendency to attract minerals from sand over time. This will cause electrolisis over time. This may take several years to develop. So, you can't go wrong either way, but remember, nothing lasts forever.
ANS 2 - I would suggest using 1 1/4 Municipal Poly pipe. This is commonly used in my area and is flexible, very strong and has no joints every 20 feet as PVC does. Easy to fit and VERY hardy.
What else can I help you with?
Where does the supply authorities cable enter a building?
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
What is a meter stop?
A meter stop is a small metal or plastic peg placed just beyond the limits of normal meter movement on an analog meter movement to prevent the needle from moving too far off scale. Overloading a meter so that it hits the meter stop hard is often called "pegging" the meter and can damage it by bending the needle.
What psi water pressure should be given for 33 meter height building?
1000000 ml
What is the weight of 1meter copper bus bar size 150 10mm?
150×10=1500 1500×8.96=13440 ÷1000 kg/meter 13.440
What is the k factor for a copper conductor at 68 degrees?
The k factor, or thermal conductivity, for copper at 68 degrees Fahrenheit (20 degrees Celsius) is typically around 401 W/m·K (watts per meter per kelvin). This value can vary slightly depending on the purity of the copper and the specific temperature conditions, but it remains relatively consistent for standard applications. Copper's high thermal conductivity makes it an excellent choice for electrical and thermal applications.
What type of pipe is used from your water meter to house?
Pvc, Wirsbo, Copper, galvenized, pex, or Polyethylene
How much does 1 cubic meter of copper weigh?
The weight of 1 cubic meter of copper is approximately 8,960 kilograms.
How much does 1 cu meter of copper weigh?
The weight of 1 cubic meter of copper is approximately 8,960 kilograms.
How do you ground a home gas meter?
To ground a home gas meter, you need to follow your local building codes and regulations. Typically, this involves connecting a copper wire from the gas meter to a grounding rod installed in the ground near the meter. It is important to hire a qualified electrician to ensure the grounding is done correctly and safely.
What is the resistance value of 1 meter copper wire?
The resistance value of a 1 meter copper wire depends on its gauge (thickness) and temperature. For example, a 1 meter wire of 24-gauge copper has a resistance of about 25.67 ohms at room temperature. It is important to consider these factors when calculating the resistance of copper wire.
What is the wire coming out of the electric meter?
If you have a copper wire coming out it would be a"ground." This wire is there in case there is crossed wires inside the meter. It allows the electricity to seek the shortest route to the ground through the wire instead of through something dangerous or distructive.
What is the weight of 65X10 copper flat per meter?
1meter of 65*10 copper flat is 5.811Kgs.
What the weight of copper per cubic meter?
The weight of copper per cubic meter is approximately 8,960 kilograms. This density can vary slightly depending on the specific alloy or form of copper, but it generally remains close to this value for pure copper. Thus, when calculating volume or weight for applications involving copper, this figure is commonly used.
How much does copper cost per linear meter?
The cost of copper per linear meter can vary depending on market conditions and the type of copper being purchased. As of current market data, the price of copper can range between $5 to $10 per linear meter. It's advisable to check with local suppliers or online sources for the most up-to-date pricing information.
Where does the supply authorities cable enter a building?
find your electric Meter and you've found the point of entry, or depending on where the electric meter is in the building, you can trace the cable back from the meter to the point of entry.
The perimeter of a square building is 812 m How long is each side?
If the perimeter of a square building is 812 meter then each side is 203 meter long
How tall is the cctv building?
1 nano meter
