0
What else can I help you with?
A W bulb and a W bulb are connected in series in a circuit Which bulb has the greater current flowing in it?
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same. The two bulbs have the same current flowing through them.
What will happen to the current through R1 and R2 if R3 fails open?
If R3 fails open, it effectively removes it from the circuit, increasing the total resistance. As a result, the current through R1 and R2 will decrease because the total current flowing in the circuit will be reduced due to the higher resistance. Depending on the configuration of the resistors, the voltage across R1 and R2 may also change, further affecting the current through each resistor.
What is a passive element in a circuit?
A passive element is an element of the electrical circuit that does not create power, like a capacitor, an inductance, a resistor or a memristor.
Is it true that a resistor raises the voltage across its terminals as current flows through it?
It depends on how you choose to define current and polarity...The normal convention is that current flows from positive to negative, even though that is not true. It is simply a convention, making it easier to analyze a circuit and to not have to deal with negative numbers. In this convention, the terminal of the resistor that current is flowing into will be more positive than the other terminal.The accepted reality is that current flows from negative to positive. In that convention, the terminal of the resistor that current is flowing into will be more negative than the other terminal.It does not really matter which convention you use, so long are you are consistent in the application of the convention and in the treatment of signs.Thank you, so it is not true, right?Another AnswerNo, it is not true. In order for current to pass through a resistor, there must be a potential difference across its ends. The magnitude of the current depends on the value of the potential difference. So a larger current is the result of a larger potential difference, NOT the other way around.The same applies to 'voltage drops'. Voltage drops are not the result of a current passing through resistors in series; voltage drops are necessary for the current to flow through each resistor.
The relationship between the current leaving the source and the current through each load in a parallel circuit.?
In a parallel circuit, the total current leaving the source is equal to the sum of the currents flowing through each individual load. This means that the current through each load can vary depending on the resistance of that load, but the total current from the source remains constant. Each load receives the same voltage from the source, which influences the amount of current it draws based on Ohm's Law (I = V/R). As a result, the relationship is defined by the equation: I_total = I_1 + I_2 + I_3 + ..., where I_total is the total current and I_1, I_2, I_3, etc., are the currents through each load.
What type of burns are a result of current flowing through and exiting a body?
Electrical burns
What types of burns are the result of current flowing through and exiting the body?
electrical burns
What is the result in an electric current flowing through a wire?
The result of an electric current flowing through a wire is the movement of electric charge, typically in the form of electrons, from one point to another. This flow of charge creates a magnetic field around the wire and generates heat due to resistance in the wire material. The amount of current flowing is determined by the voltage applied and the resistance of the wire.
If the resistance of an electric current is 12 ohms and the voltage in the current is 60 V the current flowing through the circuit is?
..using the formula Voltage(V)=Current(I) * Resistance(R) .. we can get the result ...current will be 5 Ampere
A W bulb and a W bulb are connected in series in a circuit Which bulb has the greater current flowing in it?
A series circuit is where there is only one path for the current. As a result, and as a direct consequence of Kirchoff's current law, the current at every point in a series circuit is the same. The two bulbs have the same current flowing through them.
What components in a circuit try to .the electricity flowing through them?
Resistors are components in a circuit that try to limit the flow of electricity passing through them. They are designed to impede the current and create a voltage drop as a result.
What happened to the electrodes as a result of the electric current flowing?
As electric current flows through the electrodes, they may experience heating due to resistance. This heating can cause the electrodes to degrade or even melt depending on the intensity and duration of the current. Additionally, the current may lead to chemical reactions at the electrode surface, resulting in oxidation or other forms of electrode degradation.
How transformer output connections get burn?
Poor connections could result in arcing; the transformer could be overloaded as well, resulting in more current flowing through them than designed.
How does a change in the size of the current through a bulb affect it's light output?
An increase in the current through a bulb will increase its light output because more current means more electrons passing through the filament, which generates more heat and light. Conversely, a decrease in current will result in lower light output as there are fewer electrons flowing through the filament to produce light.
What happens to the compass needle in Figure 7-11 when the current through the conductor is reversed?
When the current through the conductor is reversed, the magnetic field around the conductor will also reverse. As a result, the compass needle in Figure 7-11 will deflect in the opposite direction compared to when the current was flowing in the original direction.
Energy is a current carrying coil is stored in the form of?
The energy in a current-carrying coil is stored in the form of magnetic energy in the magnetic field produced by the coil. This magnetic energy is a result of the interaction between the current flowing through the coil and the magnetic field it generates.
What happens to the electric current in a wire as voltage is increased?
As voltage is increased, the electric current in a wire also increases because the relationship between voltage, current, and resistance is described by Ohm's Law (V = IR). If resistance remains constant, a higher voltage will result in a higher current flowing through the wire.
