water pipe
Which type of pipe is preferble for cooling water system inside refinery is it lsaw or hsaw
Schedule 40 PVC is the type and thickness of water pipe.
It's a type of pipe
You can use type ( M ) in Tulsa Oklahoma, but i always use type ( L ) easer to put together
Depending where the noise is coming from but normally this type of question relates to water hammer which is caused by pipes not being secured properly, make sure all piping on walls and in roof are secured down properly with pipe straps, pipe clips or pipe holders.
what type of material the pipe is made out of.
No, hard water is in the water, it is not caused by the type of pipe.
Hexagon
B-vent pipe.
nlx
Water lines BELOW ground
Which type of pipe is preferble for cooling water system inside refinery is it lsaw or hsaw
Probably mineral deposits. You probably have a leaking pipe or some other type of water source that's causing the mineral to build up on the pipe.
Schedule 40 PVC is the type and thickness of water pipe.
a back riser or prolite
During prper winterization, the water in the bottom drain is usually "blown" out with compressed air. How this happens, is that a pipe with a schrader valve (the same type of valve on a ture intertube) is inserted into a pipe that is threaded into the pipe below the skimmer (with the leaf basket removed) An air compressor is then used to fill the tube with air. The air forces the water out of the entire pipe. Bubbles will come up from the drain when all of the water has been blown out of the pipe. The pressure of the air being in the pipe keeps the water from flowing back into the pipe. Hope this answers your question.
It depends on the type of system you have. 1 pipe in, or 1 pipe in and 1 pipe out. Single pipe in/out, try replacing the relief valve or simply shimming the end of the radiator opposite where the pipe comes in. This lets water bleed out of the radiator and stops the klanging.