0
What else can I help you with?
Can a globe valve be uses as a blowdown valve?
HECK NO READ the ASME code or the NBBI Also read up on valves and what they are designed to do. A "Globe" valve is used for THROTTLING and severely restricts flow Personally I like using a GATE valve in combination with a ball valve for Blow down applications
What is a gate valve for a water line?
A gate valve is a type of valve used in water lines to start or stop the flow of water. It features a flat gate that can be raised or lowered to control flow, making it ideal for applications where a straight-line flow of fluid and minimal pressure drop are desired. Gate valves are typically fully open or fully closed, rather than allowing for throttling, and are commonly used in pipelines for their durability and reliability.
What is the difference between a capillary tube and a expansion valve?
The throttling devise can be the valve or the copper tubing that allows the flow of the refrigerant through very small opening also called as the orifice. The throttling devices allow restricted flow of the refrigerant. The throttling devices are also called as the expansion valves because when the refrigerant passes through them the pressure of the refrigerant drops down or it expands..Capillary tube is one of the most commonly used throttling devices in the refrigeration and the air conditioning systems. The capillary tube is a copper tube of very small internal diameter. It is of very long length and it is coiled to several turns so that it would occupy less space. The internal diameter of the capillary tube used for the refrigeration and air conditioning applications varies from 0.5 to 2.28 mm (0.020 to 0.09 inches). Capillary tube used as the throttling device in the domestic refrigerators, deep freezers, water coolers and air conditioners.
What type of valve is used in a peanut butter factory ball or gate or globe or gate?
gate valve. globes are used for throttling and have far too many turns. ball valves are not made for thick stuff. this question was on the inter-provincal exam they had globe valve, gate valve, diaphragm valve and piston valve. for answers too choose from.
What is the application of boiler stop valve?
Stop Boiler Valve (or Crown Valve) is installed on an outlet line of a boiler. It's purpose is isolation of a boiler from a downstream steam line. Its position may be either open or close, it cannot be used for throttling of steam.
Is gate valve used for throttling?
Never. Throttling will erode the valve seat and then the valve will never shut off completely.
Why is a throttling valve called an expansion valve?
It is not.. A globe , needle , ball valve are used for throttling For expansion either a shock absorber , diaphragm tank or air chamber are used to allow for expansion
What is the difference between reflux valve and check valve?
A check valve allows for flow in one direction and a gate valve is used for positive shut off and a globe valve is used for throttling
What is the difference between a globe valve and a butterfly valve in terms of application?
Globe is used for throttling
What is the function of gate valve?
A gate valve is positive shut off and used for on of off . A globe valve is for throttling
Can a globe valve be uses as a blowdown valve?
HECK NO READ the ASME code or the NBBI Also read up on valves and what they are designed to do. A "Globe" valve is used for THROTTLING and severely restricts flow Personally I like using a GATE valve in combination with a ball valve for Blow down applications
What is the purpose of a throttling device in a mechanical system?
A throttling device in a mechanical system is used to regulate the flow of a fluid or gas by controlling the amount of pressure or flow rate. It helps to maintain a desired level of performance and efficiency in the system by adjusting the flow as needed.
What is the difference between a capillary tube and a expansion valve?
The throttling devise can be the valve or the copper tubing that allows the flow of the refrigerant through very small opening also called as the orifice. The throttling devices allow restricted flow of the refrigerant. The throttling devices are also called as the expansion valves because when the refrigerant passes through them the pressure of the refrigerant drops down or it expands..Capillary tube is one of the most commonly used throttling devices in the refrigeration and the air conditioning systems. The capillary tube is a copper tube of very small internal diameter. It is of very long length and it is coiled to several turns so that it would occupy less space. The internal diameter of the capillary tube used for the refrigeration and air conditioning applications varies from 0.5 to 2.28 mm (0.020 to 0.09 inches). Capillary tube used as the throttling device in the domestic refrigerators, deep freezers, water coolers and air conditioners.
What the different valve sdnr and globe valve?
A globe valve is designed for throttling flow and provides a spherical body shape that allows for precise control of fluid flow. It features a movable disk or plug that can be raised or lowered to adjust the flow rate. In contrast, a SDNR (Sliding Disc Non-Rising) valve is a type of valve that uses a sliding disc mechanism to open and close, often offering quicker operation and a more compact design. While globe valves are typically used for regulating flow, SDNR valves are often favored for on/off applications in systems where space constraints are a concern.
Can a ball valve be used to throttle flow?
no it can't , valves you can use are a prv pressure reducing valve or a globe or flow valve
Disadvantages of butterfly valve?
The use of butterfly valves for control applications is limited to the valve opening range between 30 degrees to 70 degrees. Throttling using butterfly valves is limited to low pressure drop applications. Potential cavitation is a concern when butterfly valves are used. Also possibility of a choked flow is a concern.
What type of valve is used in a peanut butter factory ball or gate or globe or gate?
gate valve. globes are used for throttling and have far too many turns. ball valves are not made for thick stuff. this question was on the inter-provincal exam they had globe valve, gate valve, diaphragm valve and piston valve. for answers too choose from.
