In U. S. household wiring the two primary phases of 110 to 120 volts rms are 180° out of phase with each other which is why the voltage measured from line 1 to line 2 is double that of each line measured to the common return. The outputs of two identical Transformers would therefore be additive if connected in series and in phase and subtractive if out of phase. Please note that if the phase relationship of the inputs is unknown, such as that coming from two independent portable generators, for example, the summed output voltage will be unpredictable.
power distribution Audio Railway
You use three CTs, one per line conductor, each feeding a separate ammeter,
In any situation, filtering is used to separate different sized or differently composed elements one from another.
The process of asingle-phase ac voltage generated from hydro-powerAnswerPower station alternators generate three-phase electricity as, for any given load, it is more economical in terms of the total volume of copper required by transmission lines, transformers, etc. Single-phase supplies are normally produced by small, portable, alternators. The difference between the two is the way in which the machines' armatures are wound. For a three-phase machine, there are three separate windings, physically displaced from each other by 120 degrees, so three phase voltages are produced which are 120 electrical degrees apart. Single-phase machines, on the other hand, have just one armature winding, and produce just one voltage.
To separate iron and aluminum cans, you can use a magnet, as iron is magnetic while aluminum is not. When you pass a magnet over a mixed collection of cans, the iron cans will be attracted to the magnet and can be easily removed. Alternatively, advanced sorting technologies like eddy current separators can also be used, which exploit the different conductive properties of metals to efficiently separate aluminum from iron.
No, They never combined. They were all separate Transformers.
An oil separator is a device designed to separate well fluids produced from oil and gas wells into gaseous and liquid components. The various components have different densities and this allows the oil separator to separate them.
Yes they synthesize them. Separate parts are produced
As of April 2013, there have been eighteen separate Buick models produced by Buick / General Motors. A few examples of Buick models include the Buick Skyhawk, Buick Regal, and the Buick Roadmaster.
power distribution Audio Railway
The homophone for separate is "separate." Homophones are words that sound the same but have different meanings or spellings.
Meiosis I should not produce haploid cells. They should be diploid because before meiosis I the diploid cell duplicated its DNA. It is only after Meiosis II that the four cells are haploid.
During meiosis, the homologous chromosomes separate and go to different gametes.
No, keratin is a type of protein that makes up hair, skin, and nails. Skin color is primarily determined by melanin, a pigment produced by specialized cells called melanocytes in the skin. Keratin and melanin are produced by different cell types and have separate functions in the skin.
They ate in separate restaurants or separate rooms.
When gametes (sex cells) are produced, allele pairs separate or segregate leaving them with a single allele for each trait
You can separate the salt from the water. You need a special machine to separate salt from the water. but its very hard to do. I hope i answered your Question.