0
What else can I help you with?
Does frequency effect total inductance?
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
Is loading effect more when load impedance is less then source impedance?
The higher the mismatch between the load impedance and source impedance, the higher the loading effect.
What are the factors effect on the value of impedance when connect inductor and resistor in series?
Impedance (expressed in ohms) is the vector sum of a load's resistance and inductive reactance.Resistance is determined by the length, cross-sectional area, and resistivity of the conductor, while the inductive reactance is affected by the inductance of the load and the frequency of the supply.Resistance can also be affected by the 'skin effect' which causes the current to flow towards the surface of a conductor, reducing the effective cross-sectional area of the conductor. This is called 'a.c. resistance', and increases with frequency (at normal mains frequency, a.c. resistance is not markedly greater than d.c. resistance).
What effect does the amplifier have on the frequency of the signal?
No effect on frequency but increases it's amplitude.
How you can eliminate loading effect in amplifiers?
By increasing the input impedance of amplifier.
Does frequency effect total inductance?
Inductance is inductance, and is not a function of frequency. Frequency affects reactance, and ultimately impedance, not inductance.
Is loading effect more when load impedance is less then source impedance?
The higher the mismatch between the load impedance and source impedance, the higher the loading effect.
Will lowering my Yamaha r6 effect the way it corners?
Lowering your Yamaha R6 should not effect the way it corners. Lowering a motorcycle should never effect its driving ability.
What are the factors effect on the value of impedance when connect inductor and resistor in series?
Impedance (expressed in ohms) is the vector sum of a load's resistance and inductive reactance.Resistance is determined by the length, cross-sectional area, and resistivity of the conductor, while the inductive reactance is affected by the inductance of the load and the frequency of the supply.Resistance can also be affected by the 'skin effect' which causes the current to flow towards the surface of a conductor, reducing the effective cross-sectional area of the conductor. This is called 'a.c. resistance', and increases with frequency (at normal mains frequency, a.c. resistance is not markedly greater than d.c. resistance).
Voltmeter DMM or VOM has the higher loading effect?
The VOM has the higher loading effect, because it has a lower impedance. It is typical for a VOM to have an impedance of 20K ohms per volt while the DMM has a fixed impedance of 10M ohms or 20M ohms.
What is the meaning of the term impedance?
it is combined effect of resistance and inductance
What effect does low impedance have on voltage regulation?
raised voltage output
What effect does the amplifier have on the frequency of the signal?
No effect on frequency but increases it's amplitude.
Effect of high frequency sounds in birds?
effect of high frequency sounds
Why is a Clapp oscillator preferred to a Colpitts oscillator?
Advantages: Good wave purity Fine performer at high frequency Good stability at high frequency Wide operation range 1 to 60 MHz Disadvantages: Poor isolation (Load impedance v.s. frequency) Hard to design by samiur rahman hasib
What effect do enzymes have?
Simply, the effect of lowering the activation energy of biochemical reactions.
What is the effect in an input impedance of a common emitter amplifier if the bypass capacitor is removed?
The input impedance of a common emitter amplifier is hfe (or beta) times the sum of the emitter resistance, re = kT/qIc, plus the external impedance in series with the emitter. k - Boltzmann's constant, T - degrees Kevin, q - electron charge, Ic - collector current makes the intrinsic emitter resistance about 26 ohms at 1 ma. If the bypass capacitor impedance is much less than 26 ohms at the frequency of interest, then for a beta = 100 transistor operating at 1ma the input impedance is about 2600 ohms at low frequencies ie. 100 * (26 + 0). Say the external emitter resistance is 1K ohm and you remove the bypass cap. The total emitter resistance is now 26+1000 or 1026 ohms and the input impedance is now 100 * (26+1K ohms) or 102.6K ohms.
