0
If we are speaking of only one fastner, then the bolt,especially if used with washers are far the best. It depends on how the boards are oriented. If you're trying to strengthen two planks (flat side to flat side) and you have the room (after they're installed) then bolts, washers, lock washers, & nuts are the best. Screws set in at angle will hold better than nails. If this is a permenant application, you can use liquid nails, but it really isn't necessary.
What else can I help you with?
A bolt that is threaded into a casting is called?
Cap screw
The number 6-32 means what to a screw or bolt?
6 is the diameter of the bolt whereas 32 is the thread pattern. Usually used in machine screws.
What is cbore?
Counterbore- A small hole is usually made for the threaded part of a screw or bolt. The Counterbore is an additional hole made to hide the head of the screw or bolt. If using carriage bolts make sure the hole is large enough to get your socket in as well.
What is thread depth?
It's the depth of the cut from the crest of the surface down to the base on a bolt or screw.
What is the difference between screw and nut?
A nut is called screw when its head is tightend in component .but in case, tight of nut is not possible without bolt.since screw is tight without nut bolt it is not possible in case of nut.
What are the design considerations for making a bolt and an screw?
Make sure the groves are in a spiral shape and that the grooves on the bolt and the screw fit together
Is a bolt a type of screw?
Both screws and bolts use threads to create a spiral wedge, a simple machine. Screws have pointed ends designed to dig into materials and hold them together. A bolt requires a nut at the other end and pulls the two together to connect them.
Is Pittsburgh Screw and Bolt Company still in business?
Pittsburgh Screw and Bolt became the Screw and Bolt Company of America. It no longer exists.
How do you release the bolt to a j.c. Higgins 583.6?
Remove the screw that is above the bolt on the receiver. This screw holds the bolt into the receiver and once it is removed the bolt will slide out.
How a bolt is used?
Bolt is used to tight the screw
What is an Allen screw?
An Allen screw is a screw whose head has a hexagonal socket.
What is an example a screw?
Some examples of a screw are: - A light bulb - A lid on a jar - A bolt - A corkscrew
In kannada what says for screw and nut bolt?
Screw=moLe
What type of simple machine is a bolt?
A bolt is a screw I think.
What are the parts of the screw?
the parts of the screw are thread, pitch, and the last is bolt
Bolt is to Nut as Hook is to?
screw
What is another four letter word for screw?
Nail or bolt, which is threaded like the screw.
