0
What else can I help you with?
Can loose neutral wire effect the operation of Earth Leakage Circuit Breaker?
Yes, a loose neutral wire can effect the operation of Earth Leakage Circuit Breaker.
What will be the effect if the d.c motor is directly connected across the supply without starter?
At zero rpm a dc motor draws a current that could be enough to blow the circuit breaker. In that case it is normal to place a resistor in series to limit the current to slightly below the circuit-breaker setting. The resistor is switched out after the motor runs up.
Why inductor block ac and pass dc?
When your circuit starts up, your inductor creates an electrical current in the opposite direction. With dc, this effect vanished after the circuit is started. With ac, the current keeps starting and stopping so the inductor keeps creating a current in the opposite direction.
In which circuit did screwing out one bulb not influence the lighting of the other bulb?
A parallel circuit will not effect the other bulb. If the bulbs are in a series circuit the other bulb will not turn on.
What is the effect on the voltage gain of the circuit if different frequency values were to be used?
== ==
What would be the effect on the circuit should the starter be taken out the lamp is started?
Once started the fluorescent tube no longer needs the starter. In fact starters are designed to electrically "remove" themselves from the circuit when the fluorescent tube is conducting.
What would b the effect on the circuit should the starter be taken out after the lamp is started?
Once started the fluorescent tube no longer needs the starter. In fact starters are designed to electrically "remove" themselves from the circuit when the fluorescent tube is conducting.
What would be the effect of the circuit if the starter is taken out after the lamp is started?
It would stop.
What effect does Reverse Reactive current have on a fluorescent fitting?
Its good for it
What is the fluorescent effect?
The fluorescent effect is the emission of light by a substance that has absorbed light or other electromagnetic radiation. This phenomenon occurs when the absorbed radiation is re-emitted at a longer wavelength, usually in the visible range, resulting in a glow or fluorescence. Fluorescent materials are widely used in various applications, including fluorescent lighting, biological imaging, and security features.
How do you make fluorescent blue?
To make a fluorescent blue color, you can mix a bright blue pigment with a fluorescent additive like fluorescent blue paint or powder. This will give your blue color a vibrant glow under UV light. Experiment with different ratios to achieve the desired fluorescent effect.
Can you create fluorescent colors from normal paint?
No. You must begin with fluorescent pigment.
What happens if the capacitor in fluorescent tube becomes faulty?
There's no effect since the capacitor was already faulty i.e it was like not in the circuit. Install a healthy capacitor because it will improve the power factor of the fluorescent lamp circuit thus reducing energy wasted.
Could there be a strobe effect with fluorescent lighting?
Yes, it usually happens when the tubes are cold. As the fixture and tubes warm up this effect disappears.
Why would another component effect the electrical current in a series circuit?
All the components in a circuit have a potential effect on the total current used by the circuit. You have to be more specific to get a more precise answer.
How can an ammeter be connected in a circuit and not effect the flow of current?
The ammeter does affect the flow of current in a circuit, however, the resistance of the ammeter is so small in comparison to the circuit that the effect is negligible. It is connected in series.
What is a measurable effect caused by close circuit that you can hear?
a measurableeffect caused by close circuit that you can hear
