it depends on what type of load. Motor amperage will drop off as voltage rises. loads such as lights will increase amperage with voltage rise.
An ammeter measures amperage not voltage.
Ohms Law says Voltage = Current x Resistance. Hence if voltage rises, so will current.
Power (P) = Voltage (V) x Amperage (I) Written as P=VxI or to find Voltage V=P/I Voltage is measured in Volts (V) Amperage is measured in Amperes (Amps or A) Power is measured in Watts (W)
A step up transformer converts low voltage,high amperage current to a high voltage,low amperage current. It requires large diameter wire to carry the high amperage in the primary coil.
This doesn't make sense, "current" is "amperage" so the higher the voltage the lower the amperage, and the lower the voltage the higher the amperage.
it depends on what type of load. Motor amperage will drop off as voltage rises. loads such as lights will increase amperage with voltage rise.
Depends on the voltage and amperage of the battery vs. the voltage and amperage required of the bicycle.
The standard voltage of a wall outlet is 120 volts, and the standard amperage is 15 amps.
Voltage is equal to amperage time resistance. V=IR Therefore, I'd say voltage times amperage is equal to amperage squared times resistance. VI=IIR Really there's no point in multiplying the two. However, if you were to divide voltage by amperage, you would have the resistance of the circuit. V/I=R
An ammeter measures amperage not voltage.
The standard voltage for a typical electrical outlet is 120 volts, and the standard amperage is 15 amps.
Ohms Law says Voltage = Current x Resistance. Hence if voltage rises, so will current.
You can calculate amperage (A) using the formula A = W / V, where W is the power in watts and V is the voltage. Simply divide the power in watts by the voltage to find the amperage.
Not necessarily. Amperage (current) is just one component of electrical power. Power is the product of voltage and current. To calculate power, you need both voltage and amperage.
To calculate the amperage for 2kW, you need to know the voltage of the circuit. For example, if the voltage is 120V, then the amperage would be 16.67A (2000W / 120V = 16.67A). If the voltage is 240V, then the amperage would be 8.33A (2000W / 240V = 8.33A).
Generally speaking an appliance (eg tv) is supplied with power so when it is off it has voltage supplied. After yo turn it on it starts to draw power called amperage the voltage doesn't get higheur but the amperage does Amperage is the load being drawn through a circiut