yes... this is possible if a diode i connected in reverse bias with a battery and a resistor for example. A diode in reverse bias means its anode will be connected to positive terminal of the battery and its cathode to the negative terminal of the battery. In such a case, minimal current flows through the circuit which can be neglected.
The electric force that makes current flow in a circuit is related to the resistance.
An electric circuit.
RCD cut the current to the circuit while preventing the electric shock
In a series circuit the current remains the same throughout the circuit. This is not the case for parallel circuits.
Electric current does not drop. Electric voltage, however, drops across a wire because the wire has non-zero resistance. (Do not confuse electric current with electric voltage - they are not the same.)The reason current does not drop is that, in a series circuit, according to Kirchoff's current law, the current at every point in a series circuit is the same.
Correct Answer= "the current will increase"
The flow of electric current in an AC circuit is alternating, it flows one way then the other, with reference to ground.
Voltage causes current to flow in an electric circuit.
Voltage causes current to flow in an electric circuit.
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
A break in the wires of an electric current will break or cut the circuit and stop the current from flowing.
I guess Electric Circuit....
The electric field in a circuit is directly related to the current flowing through it. The electric field is what drives the flow of electric charge, which is the current. In other words, the presence of an electric field is necessary for current to flow in a circuit.
If the electric circuit is broken, there will be no medium for transfer of electrons and flow of current. Hence, electric current does not exist.
The name for the status of a circuit that has breaks which electric current that can't flow is called a Closed Circuit. Electric current cannot flow through an open circuit.
Yes, turning on a light or electric appliance completes a circuit by allowing current to flow from the power source, through the appliance, and back to the power source. This flow of electrons enables the appliance to function and produce light or perform its intended task.
A closed circuit.