0
What else can I help you with?
What benefit high voltage on ship?
smaller conductor,insulator & transformer
What voltage should 208 3 phase leads read?
From line-to-line (any two of the three leads) voltage or 'line voltage', the voltage is 208 V. The line-to-neutral (one of the three leads and the neutral conductor), or 'phase voltage', is 120 V.
Why voltage are not produce in netural wire?
First of all, by definition, 'voltage' is another word for 'potential difference', and a potential differenceexists between two different points. So a single conductor cannot experience a 'voltage' or 'potential difference'. Your question, therefore, should ask why a neutral conductor has no 'potential'. By general agreement, potentials are measured with respect to earth (ground), which is arbitrarily assumed to be at 0 volts.The answer is that a neutral conductor is earthed, or grounded, so theoretically its potential must be the same as earth -i.e. 0 volts. But, in practise, due to the resistance of the conductor that connects the neutral conductor to earth, the neutral conductor can often have a potential of several volts with respect to earth.
What is a line to line voltage?
In a 3 phase system, the voltage measured between any two phase is called line to line voltage.And the voltage measured between line to neutral is called phase to neutral (line to neutral) voltage.AnswerThere is no such thing as a 'phase-to-phase' or a 'phase-to-neutral' voltage. The correct terms are 'line-to-line' and 'line-to-neutral'.The voltage between any two line conductors is called a line voltage.In a three-phase, three-wire, system, the line voltage is numerically equal to the phase voltage.In a three-phase, four-wire, system, the voltage between any line conductor and the neutral conductor is called a phase voltage. The line voltage is 1.732 times larger than the phase voltage.
What is the voltage for each leg on a 480v 3-phase pannel phase to neutral?
Only one neutral conductor is typically in a 3 phase panel.
What benefit high voltage on ship?
smaller conductor,insulator & transformer
How are voltages imported into installations through the supply neutral conductor?
A 'voltage' is another name for a potential difference. As the name implies, a potential difference exists between two different points or, in the case of an electrical installation, between the line conductor and the neutral conductor. So the neutral does not 'import voltages'. Voltages exist between the line (hot) conductor and the neutral conductor.
Is the neutral conductor also referred as the safety conductor?
Yes, the neutral conductor is also referred to as the safety conductor as it helps to maintain a stable voltage and provide a return path for current in electrical circuits, ensuring safety by preventing shocks and overloads.
What voltage should 208 3 phase leads read?
From line-to-line (any two of the three leads) voltage or 'line voltage', the voltage is 208 V. The line-to-neutral (one of the three leads and the neutral conductor), or 'phase voltage', is 120 V.
Define earth voltage and neutral voltage?
As the neutral point of an electrical supply system is often connected to earth ground, ground and neutral are closely related. Under certain conditions, a conductor used to connect to a system neutral is also used for grounding (earthing) of equipment and structures. Current carried on a grounding conductor can result in objectionable or dangerous voltages appearing on equipment enclosures, so the installation of grounding conductors and neutral conductors is carefully defined in electrical regulations. Where a neutral conductor is used also to connect equipment enclosures to earth, care must be taken that the neutral conductor never rises to a high voltage with respect to local ground.
Why voltage are not produce in netural wire?
First of all, by definition, 'voltage' is another word for 'potential difference', and a potential differenceexists between two different points. So a single conductor cannot experience a 'voltage' or 'potential difference'. Your question, therefore, should ask why a neutral conductor has no 'potential'. By general agreement, potentials are measured with respect to earth (ground), which is arbitrarily assumed to be at 0 volts.The answer is that a neutral conductor is earthed, or grounded, so theoretically its potential must be the same as earth -i.e. 0 volts. But, in practise, due to the resistance of the conductor that connects the neutral conductor to earth, the neutral conductor can often have a potential of several volts with respect to earth.
What is multiwire branch circuit?
A multiwire branch circuit is consist`of two or more ungrouded conductors that has voltage between them and has a grounded conductor that is eoual voltage between each conductor connect to the neutral and it,s ground
What is a line to line voltage?
In a 3 phase system, the voltage measured between any two phase is called line to line voltage.And the voltage measured between line to neutral is called phase to neutral (line to neutral) voltage.AnswerThere is no such thing as a 'phase-to-phase' or a 'phase-to-neutral' voltage. The correct terms are 'line-to-line' and 'line-to-neutral'.The voltage between any two line conductors is called a line voltage.In a three-phase, three-wire, system, the line voltage is numerically equal to the phase voltage.In a three-phase, four-wire, system, the voltage between any line conductor and the neutral conductor is called a phase voltage. The line voltage is 1.732 times larger than the phase voltage.
What is the voltage for each leg on a 480v 3-phase pannel phase to neutral?
Only one neutral conductor is typically in a 3 phase panel.
The output voltage between phases of ac 3 phase supply is 240V?
No, this voltage appears ACROSS individual phases, or BETWEEN a line conductor and the neutral
Can you use phase voltage as a single phase?
A single phase supply can be obtained between any pair of line conductors or between a line conductor and a neutral conductor.
What is line voltage in star connection?
Phase to phase voltage is 1.732 (the square root of 3) times the phase to star point (neutral) line voltage.e.g. if the line voltage is 220Vphase voltage = 1.732x220 = 380V (approx)Additional AnswerYou might also like to know that the line voltage leads the phase voltage by 30 electrical degrees. And, incidentally, the correct expressions are 'line-to-line' not 'phase-to-phase', and 'line-to-neutral' not 'phase-to-neutral' (think about it, a line voltage is measured from the junctions between adjacent phases, so they cannot be 'phase to phase'!)
