0
What else can I help you with?
Can you connect a 24v dc motor to household current?
You need a DC power supply in order to connect a 24v DC motor to household power.
Where is the drier on the AC system of a 1995 Honda Civic 1493 engine?
the drier is located on the driver side next to the washer solvent bottle, you will have to remove the plastic fender well in order to access it.
How do you fix dripping faucet?
Switch off supply, unscrew top pf faucet, remove stem and washer (or cartridge) take it to store, buy identical one, come home and re-fit in reverse order.
Expansion joints are used in bridges in order to prevent the bridge from?
Buckling; shriveling, bending, or curling from heating or pressure. (heating, in this case)
What is the purpose of a pressure reducing valve?
The function of PRV is to supply gas at set pressure as per the design conditions. Suppose the upstream O2 pressure is 30 Bar and we need constant pressure of 12 Bar down stream. So we need a microprocessor controlled PRV to sense the down stream pressure and always it will close or maintain the system pressure to set value of 12 bar. It is to be noted that initial pressurization to be done very slowly by operating the PRV manually and when the pressure is equal then put it in Auto.
How to be careful when using a pressure washer?
In order to pressure wash a deck you must have it set on a low pressure. A high pressure can completely destroy the wood.
Can you use bleach in a pressure washer?
It is not recommended to use bleach in a pressure washer as it can damage the internal components and seals. Bleach can also be harmful if sprayed onto plants or vegetation. It is best to use cleaning solutions specifically designed for pressure washers.
What is the correct order of installation for a washer and lock washer?
The correct order of installation for a washer and lock washer is to first place the washer on the bolt or screw, followed by the lock washer. The lock washer helps prevent the nut from loosening due to vibrations or other movements.
What is the recommended order of installation for a lock washer and a flat washer?
The recommended order of installation for a lock washer and a flat washer is to place the flat washer first, followed by the lock washer on top of it. This helps to ensure proper locking and securing of the fastener.
What is the correct order of placement for a lock washer and a flat washer in a mechanical assembly?
The correct order of placement for a lock washer and a flat washer in a mechanical assembly is to first place the flat washer against the surface, followed by the lock washer on top of the flat washer. This helps to secure the nut in place and prevent it from loosening during operation.
How do you take petrol out of your tank?
Accelerate real hard and don't stop You can siphon the fuel out. Sometimes it is necessary to remove the filler neck hose from the tank in order to insert a siphon hose.
What is the correct order for installing a lock washer?
The correct order for installing a lock washer is to place it between the nut and the surface being fastened, with the teeth of the lock washer facing towards the nut.
Can you siphon gas from a Chevy Suburban?
In order to siphon the fuel out of the tank you need to remove the fill hose from the tank. The hose is difficult to get to but it can be done. Once the fill hose is removed you can then slip your siphon hose into the tank. Try not to allow any dirt to get into the tank during the process.
Where can you find a repair service for a Pacific Hydrostar pressure washer?
they are very simple machines. Get the manual online order your parts and good luck. I just rebuilt my pump and it was a piece of cake...
Will i be able to siphon petrol out of a Mazda 323 astina?
Current production cars typically have anti-siphon necks on the fuel tanks in order to both prevent fuel from being siphoned out, as well as to keep foreign material from going in.
How do you rebuild a craftsman 580.767450 pressure washer pump?
To rebuild a Craftsman 580.767450 pressure washer pump, start by disconnecting the power and water supply, then remove the pump from the unit. Disassemble the pump by unscrewing the housing and removing the old seals, O-rings, and pistons, taking care to note the order of parts. Clean all components thoroughly, then replace any worn parts with new ones, reassemble the pump, and ensure all seals are properly seated. Finally, reattach the pump to the pressure washer, reconnect the water supply, and test the unit for proper operation.
Where can I find washer dryer combo specifications?
In order to find proper washer dryer combo specifications one can visit a website for the maker of that certain washer dryer. The website will likely have specifications.
