We use the "MOTOR GENERATOR SET" to convert the DC power to AC power we use DC motor and ac generator in it. It is very efficient way to convert the DC power to AC power.
If this is a homework related question, you really should consider trying to solve it yourself before looking at this answer. Otherwise, the value of the lesson, and the reinforcement provided by the assignment, will be lost to you.A moving coil measuring instrument has a coil attached to the indicator, surrounded by a magnet.A moving iron measuring instrument has a magnet attached to the indicator, surrounded by a coil.In both cases, the indicator is driven by magnetic torque caused by current flow in the coil.
RSA
Instrument Transformer
A meter can be used both on the positive or negative side of a circuit when measuring current. The current going to a load should be equal to the current coming back from the load. When measuring DC current, make sure the meter should be more than adequete to be placed in series with the circuit. Otherwise, use a clamp-on meter.
It is apples and oranges--kVA and volts are different units describing different things. Determining kVA requires measuring both voltage and current.
It's not possible to measure both of those quantities with a single instrument. Wind speed . . . anemometer Air pressure . . . barometer
Examples of vectors include velocity, force, and acceleration. These quantities have both magnitude and direction, making them suitable for representation as vectors. In physics, vectors are used to describe physical quantities that involve both size and direction.
Scalar quantities - quantities that only include magnitude Vector quantities - quantities with both magnitude and direction
Both PMMC (Permanent Magnet Moving Coil) and moving iron type measuring instruments are analog devices used for measuring electrical quantities. They both operate based on the interaction between magnetic fields and electric currents to produce a mechanical deflection for display. Additionally, they are both commonly used in applications where accuracy and precision are important factors.
The same method is used for both surface and submerged currents: you place a measuring instrument in the current to be measured, and you observe and note its progressions.
IT DEPENDS WHAT MEASURING INSTRUMENT YOU ARE USING. RMS - IF USING THE CLAMP AMMETER OR PANEL METER OSCILLOSCOPE - BOTH CAN BE READ
Equal quantities.
there are three types of quantities:-1.Scalar quantities - Scalarsare quantities that are fully described by a magnitude (or numerical value) alone.2.vector quantities - Vectorsare quantities that are fully described by both a magnitude and a direction.3.Tensor quantities - tensors are quantities that are fully described by magnitude, direction and the plane thecomponent acts on.
Yes, weights on both sides are counted when measuring balance.
Piano.
To find the volume of milk, you can use a measuring cup or a graduated cylinder, both of which are designed to measure liquid volumes accurately. For larger quantities, a kitchen scale can also be used by measuring the weight of the milk and converting it to volume using the density of milk (approximately 1.03 g/mL). If you're measuring in a recipe, a standard measuring jug would suffice for most household purposes.
Vector quantities are those that must be described with both a magnitude and direction. Scalar quantities can be described with only a single value.