An arch bridge. I think that may have been discovered quite some time ago !!!
+++
It was - the Romans used arches extensively, in buildings as a well as for bridges. However, the arch is indeed stronger than the plank, or simple beam, bridge because it transmits the loads to its abutments. You can stiffen a beam bridge by fitting it with vertical side-members, or in larger structures, frames (trusses).
Yes. An arch bridge is one of the more efficient ways of building and maintaining a bridge. Beam bridges are not as efficient. For a given span and height, an arch bridge will carry a greater load using less material. The beam structures of a beam bridge can be constructed of wood, reinforced concrete or steel (in increasing order of strength). The beams, however, must be supported by piers or an abutment at each end, which can be made out of concrete, masonry, stone, or steel (or combination thereof). The arch structure of an arch bridge can be constructed of wood, reinforced concrete, steel, or masonry, and the arch can be supported by abutments as described above, or the arch can extended down to the foundation itself. The primary advantage of an arch is that stresses caused by the load on the bridge are converted primarily into compressive stresses that are carried along the arch into the ground. Materials like stone, masonry and concrete are particularly good at carrying these compressive stresses. In contrast, loads on a typical beam-type bridge creates large tensile stresses on the bottom of the beams. Since stone, masonry and unreinforced concrete have very little capacity to withstand tension, none of these materials can be used to make a reliable and efficient beam-type bridge of any significant span.
The longest span an arch bridge can go is relevent to the radius of the arch.
Arch bridges are in the shape of an upside down "U" with mainly steel beans, while supension bridges have one or two Major verticle beams with strong wire connecting to the bridge.
Donghai bridge is a kind of mixed-kind bridge. The first part is the arch bridge. The middle one is the suspension bridge and the last part is the arch bridge.
It's an arch.
The bridge is supported by an arch or a series on arches to make the bridge stronger.
a truss
because of the support of the circles
Because it has more support in its arches.
The arch bridge design makes it stronger because it has support underneath
is the ponte vecchio bridge is an arch bridge
The brooklyn bridge is not a arch bridge
Yes. An arch bridge is one of the more efficient ways of building and maintaining a bridge. Beam bridges are not as efficient. For a given span and height, an arch bridge will carry a greater load using less material. The beam structures of a beam bridge can be constructed of wood, reinforced concrete or steel (in increasing order of strength). The beams, however, must be supported by piers or an abutment at each end, which can be made out of concrete, masonry, stone, or steel (or combination thereof). The arch structure of an arch bridge can be constructed of wood, reinforced concrete, steel, or masonry, and the arch can be supported by abutments as described above, or the arch can extended down to the foundation itself. The primary advantage of an arch is that stresses caused by the load on the bridge are converted primarily into compressive stresses that are carried along the arch into the ground. Materials like stone, masonry and concrete are particularly good at carrying these compressive stresses. In contrast, loads on a typical beam-type bridge creates large tensile stresses on the bottom of the beams. Since stone, masonry and unreinforced concrete have very little capacity to withstand tension, none of these materials can be used to make a reliable and efficient beam-type bridge of any significant span.
An arch bridge is a bridge with abutments at each end shaped as a curved arch. Arch bridges work by transferring the weight of the bridge and its loads partially into a horizontal thrust restrained by the abutments at either side. A viaduct (a long bridge) may be made from a series of arches, although other more economical structures are typically used today.
it is a hybrid between an arch bridge and truss bridge. so it is classified as an arch and truss
Arch Bridges are: 1. Masonry arch bridges 2. trussed arch bridges. Le viaduc de Garabit in Cantal France is a famous arch bridge. The Sydney Harbour bridge is a trussed arch bridge Tacoma Bridge.
The longest span an arch bridge can go is relevent to the radius of the arch.