When done correctly it doesn't matter where a weld is made.
A slot weld is a weld type made in an elongated hole (or "slot") in one of the joint members.
To measure penetration of a weld, one must cut and etch the weld, preferably on a test coupon. Etching is just using an acid that will discolor the weld metal so that there is a visible difference between the weld metal and the base metal. Once the acid has taken affect, one can measure the weld using calipers or a similar measuring device.
It varies from 3 inches to 13 inches. The electrode type, type of weld, and position of weld all determine how far you can get done with a single rod
You should not weld on concrete, as it can explode if heated
No. It is the easiest to weld as the metal puddles well, and the heat runs evenly through the joint.
A muffler shop can weld a new one in for you & is the cheapest place to get it done.
A shop can cut the bad converter out and weld a new one in.
One that is powered by your own strength. If you want the field to get stronger, spend more time at the gym.
The strength of a magnet can be determined by measuring its magnetic field using a magnetometer or a compass. The stronger the magnetic field, the stronger the magnet.
If you like to weld, I always think its easier to shop for supplies online. Here is a good site where you can do that.
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Unfortunately, you have to cut the old one out and weld a new one in. Unless you have experience with welding sheet metal, you should pay a body shop to do it.
The parents of Theodore Weld, one of the leading architects of the American abolitionist movement, were Ludovicus and Elizabeth Clark Weld.
The one that the field strength is stronger
The one that the field strength is stronger
No, field lines that are close together indicate a stronger magnetic field, not a weaker one. The density of field lines represents the strength of the magnetic field in that region.
One can purchase a field guide in a regular store or shop. As well as purchasing one in an airport, or on a safari. It regularly depends on what the field guide is based on. There is always the option of searching online.