0
What else can I help you with?
Who invented the drive rivet?
Carl Cherry
What is a countersunk screw?
A countersunk screw is one which hides the head below the surface of the wood or material. This provides a smooth surface after the screw is driven in.
Where could you use a countersunk screw?
You can use a countersunk screw in projects that involve wood. This might be a bench or even some sort of container that opens and closes.
What is a countersunk?
To countersink is to penetrate past the exterior level. For example if you screw a screw into a piece of wood with a screw gun that is set on drill, and it penetrates past the surface it would be countersunk.
Who invented the pop rivet?
Although archeologists have found rivet technology going back some 3000 years. Modern Pop Rivets, otherwise known as Blind Rivets, are reported to have been invented sometime in the 1930's by engineers Carl Cherry and Louis C. Huck. The Pop Rivet was actually developed by The George Tucker Eyelet Co. in Birmingham England in the 1930's. Cherry Rivets are similar but have a small ring that is seated in the head of the rivet when it is formed and the mandrel broken off. Two types of Cherry rivets are the Cherry Lock and the Cherry Bulb.
What is a countersunk-head rivet used for?
all sorts
Who invented the countersink rivet?
Glenn Odekirk,
Who invented the drive rivet?
Carl Cherry
What is difference between countersink and countersunk?
Countersink and countersunk are the same meaning. Countersink is English word Countersunk is German word <><><><> Present tense, and past tense. "I need to counersink these screws." "These scews were countersunk" Countersink can also be a noun- name of the tool used for that purpose. "The screws were countersunk with a countersink."
What is a countersunk screw?
A countersunk screw is one which hides the head below the surface of the wood or material. This provides a smooth surface after the screw is driven in.
What Is Countersunk Screw?
A countersunk screw is one which hides the head below the surface of the wood or material. This provides a smooth surface after the screw is driven in.
What is a tool to make a rivet thicker and shorter?
I assume the rivet you are asking about is a "tinners" rivet and not a more common "blind" rivet (commonly known as a "pop" rivet). If this the case the tool you want is called a "rivet set".
Where could you use a countersunk screw?
You can use a countersunk screw in projects that involve wood. This might be a bench or even some sort of container that opens and closes.
What is the name for a hammering tool used to shorten and thicken rivets?
upset -------------------------------------------------------------------------------- Upsetting the rivet is to compress the rivet during the installation process. That can be done with a rivet gun to "hammer" the rivet against a bucking bar, or to use a rivet squeezer to compress the rivet.
How do you get the windshield off a 1985 goldwing esclade?
They invented the screwdriver for just this problem. or maybe it's a rivet problem. a rock
What is a rivet gun?
a rivet gun is a gun
A D-D rivet is recognized by?
A DD rivet is recognised by 2 dashes on the head of the rivet
