To keep the picture locked on the screen, without the synchronization pulses it would become unstable and roll, shift, and tear making the picture impossible to view.
In case of TV broad casting, the Video Signal is not transmitted alone, but it accompanied by a number of other signals or pulses, which help the exact reproduction of the picture at the receiving end. These pulses include Blanking Pulses, Synchronizing pulses and Equalizing pulses. A combination of Picture signal and other Controlling signal or pulses is called Composite Signal. Thus Composite Video Signal may consist of Following Parts.Picture information (Data)Blanking Pulses (Delay Pulses)Vertical and Horizontal Synchronizing Pulses (controlling Pulses)Generally,A Combination of Data and Other Controlling Signal is Called Composite Signal .
First of all digital signal cant be transmitted wirelessly. digital signal can only be transmitted through optical fibre in the form of pulses. so we have to convert digital signal to analog form with the help of DIGITAL TO ANALOG CONVERTOR ( D TO A CONVERTOR). Then this analog signal should be super imposed on carrier signal called MODULATION. modem can be used for that. then that signal can be transmitted to the air through alloted band width like cellular system with the help of transceiver. at the reciveing end we can demodulate the signal with the help of modem & can convert it back to digital form through A TO D CONVERTOR.
When several signal transmitted simultaneously. this is called multiplexing of signals.many signal are combined into one and then they transmitted.
Pulse-Amplitude Modulation
Carrier
In case of TV broad casting, the Video Signal is not transmitted alone, but it accompanied by a number of other signals or pulses, which help the exact reproduction of the picture at the receiving end. These pulses include Blanking Pulses, Synchronizing pulses and Equalizing pulses. A combination of Picture signal and other Controlling signal or pulses is called Composite Signal. Thus Composite Video Signal may consist of Following Parts.Picture information (Data)Blanking Pulses (Delay Pulses)Vertical and Horizontal Synchronizing Pulses (controlling Pulses)Generally,A Combination of Data and Other Controlling Signal is Called Composite Signal .
Information refers to data that has been processed and organized to convey meaning or knowledge, while a signal is a physical representation of information that is transmitted through a medium such as sound waves or electrical pulses. In other words, information is the content being communicated, while a signal is the form in which that information is transmitted.
the digital signal is converted to analog signal after using by transmitted antenna
First of all digital signal cant be transmitted wirelessly. digital signal can only be transmitted through optical fibre in the form of pulses. so we have to convert digital signal to analog form with the help of DIGITAL TO ANALOG CONVERTOR ( D TO A CONVERTOR). Then this analog signal should be super imposed on carrier signal called MODULATION. modem can be used for that. then that signal can be transmitted to the air through alloted band width like cellular system with the help of transceiver. at the reciveing end we can demodulate the signal with the help of modem & can convert it back to digital form through A TO D CONVERTOR.
In TV transmission, a picture is converted into an electrical signal through a process called scanning, where a camera captures the image and breaks it down into pixels. These pixels are then encoded into a signal that can be modulated and transmitted over the airwaves or via cable. At the receiving end, the signal is demodulated and decoded, reconstructing the original picture for display on a television screen. This process occurs rapidly, typically at rates of 30 frames per second or higher, to create smooth motion.
When several signal transmitted simultaneously. this is called multiplexing of signals.many signal are combined into one and then they transmitted.
digital
In Pulse Code Modulation (PCM), a clock signal is essential for synchronizing the sampling and reconstruction of the audio or data signal. It ensures that the sampling occurs at regular intervals, allowing for accurate representation of the original signal. The clock also helps in maintaining the timing of data transmission, enabling the receiver to correctly interpret the sequence of coded pulses. Overall, the clock plays a critical role in achieving reliable and high-quality digital communication.
Analog signals are transmitted as electrical waves.
no. The answer is digital signal.
The flashing signal in the picture indicates a warning or alert.
Return to ZeroA type of digital signal where 1's and 0's are pulses of opposite polarity, but between each bit the line returns to the zero (ground) state. It is rather inefficient in terms of bandwidth/data rate, as each bit transmitted uses two baud (i.e. state changes).