0
What else can I help you with?
What is lapping in machining?
Lapping is a grinding process. It is done to remove high spots and to create a good seal between two surfaces. A typical example would be lapping valves in an auto engine
What is power mosfetdraw internal structure of a typical power mosfet device?
draw interstructure of a typical powerMOSFET device (semiconductor structure)
What are typical condenser tubes made of?
Copper
Which of these is a typical design of IED detonation?
time delay
What is the typical use of a transistor in an analog circuit?
amplification
Why are the typical low-slop roofs surfaces not appropriate when public access in planned?
Typical low slope roofs simply wont and are not rated for foot traffic. Check out hydrostop system they are very versatile and they have a system(coating that will hold up to foot traffic. However, the base should be able to hold up foot traffic, and a lot of of low slope surfaces are a foam system and that is not an acceptable base to handle foot traffic. Finally if you are thinking of making a low slope roof accessible to foot traffic you should have a qualified contractor and most likely an engineer take a look to determine if its safe.
Why are the typical low slop roofs surfaces not appropriate when public access in planned?
Typical low slope roofs simply wont and are not rated for foot traffic. Check out hydrostop system they are very versatile and they have a system(coating that will hold up to foot traffic. However, the base should be able to hold up foot traffic, and a lot of of low slope surfaces are a foam system and that is not an acceptable base to handle foot traffic. Finally if you are thinking of making a low slope roof accessible to foot traffic you should have a qualified contractor and most likely an engineer take a look to determine if its safe.
What is the typical dry time for tung oil when used as a finish on wood surfaces?
The typical dry time for tung oil when used as a finish on wood surfaces is around 24 to 48 hours.
What is the typical drying time for tung oil when used as a finish on wood surfaces?
The typical drying time for tung oil when used as a finish on wood surfaces is around 24 to 48 hours.
A typical property of a metal surfaces when freshly cut or polished?
Shiny.
Does mode median or mean accurately reflect typical?
In the appropriate context, they do.
How many chairs are appropriate for a typical living room space?
One is typical, but you can have up to three if your living room is a decent size.
Are fishnets appropriate office wear?
In my opinion fishnets are not appropriate office wear. Maybe for certain jobs they would be acceptable, but not your typical office job.
How many surfaces does each tooth have?
A typical tooth has five surfaces: occlusal (top biting surface), lingual (tongue side), buccal (cheek side), mesial (toward the midline), and distal (away from the midline).
How many couches are appropriate for a typical living room space?
Unless you have a very large living room, only one couch is necessary for a typical living room space.
What is typical damage from driving a car with low oil?
Most typical are spun rod bearings and scored bearing surfaces, increasing to knocking due to loose bearing, then piston rod breaking and cracking the block.
What three things do you do in a typical day that are part of the water cycle?
washingdrinking teaflushing a toilet
