Asphalt roads look similar in nature to concrete because both use an aggregate material consisting of rocks to make up as much as 60% of the volume of the final solid material.
The four-letter word you're looking for is "pave." It refers to the process of covering a road with a hard surface, typically using materials like asphalt or concrete to create a durable driving surface.
Asphalt concrete is not considered organic; it is primarily composed of aggregates (such as crushed stone, gravel, or sand) and asphalt binder, which is a byproduct of petroleum refining. While asphalt binder contains hydrocarbons, which are organic compounds, the overall composition of asphalt concrete is classified as inorganic due to its mineral aggregate content. Therefore, it is primarily a synthetic material used in road construction and paving.
Asphalt roads are considered to provide the best traction for automobiles in most conditions. Concrete roads will provide better traction in high temperature areas.
One advantage of using asphalt as the wearing course of a road is its flexibility, which allows it to better withstand temperature fluctuations and heavy loads without cracking. In contrast, one advantage of using concrete is its durability and longevity, as it can last longer than asphalt under similar conditions and typically requires less maintenance over time.
Smaller pieces of concrete are used as gravel for new construction projects. Sub-base gravel is laid down as the lowest layer in a road, with fresh concrete or asphalt poured over it.
pave
pavement
Concrete or asphalt depending on the track.
pavement
The four-letter word you're looking for is "pave." It refers to the process of covering a road with a hard surface, typically using materials like asphalt or concrete to create a durable driving surface.
Asphalt Concrete
The road surface where vehicles drive. Could be asphalt, gravel/dirt, concrete, or steel.
Asphalt concrete is not considered organic; it is primarily composed of aggregates (such as crushed stone, gravel, or sand) and asphalt binder, which is a byproduct of petroleum refining. While asphalt binder contains hydrocarbons, which are organic compounds, the overall composition of asphalt concrete is classified as inorganic due to its mineral aggregate content. Therefore, it is primarily a synthetic material used in road construction and paving.
depending on what you are actually meaning,tarmac,macadam,concrete,and asphalt are what come to mind.
Warren H. Chesner has written: 'User guidelines for waste and by-product materials in pavement construction' -- subject(s): Additives, Asphalt concrete Pavements, Base courses, Concrete Pavements, Design and construction, Fills (Earthwork), Handbooks, manuals, Handbooks, manuals, etc, Pavements, Pavements, Asphalt concrete, Pavements, Concrete, Roads, Waste products as road materials 'Assessment of the potential suitability of southwest Brooklyn incinerator residue in asphaltic concrete mixes' -- subject(s): Additives, Asphalt concrete Pavements, Fly ash, Pavements, Asphalt concrete, Waste products as road materials
Assuming road planings are asphalt concrete the mass of one metre cube volume is 2140 kilogrammes.
Gary. Thompson has written: 'Determining asphalt content for recycled asphalt pavement (RAP) materials' -- subject(s): Asphalt concrete, Asphalt concrete Pavements, Oregon, Recycling, Testing, Waste products as road materials 'Investigation of the Bailey method for the design and analysis of dense-graded HMAC using Oregon aggregates' -- subject(s): Additives, Aggregates (Building materials), Asphalt concrete Pavements, Design and construction