48 is volt scale and negative voltage is used for safety of media, to prevent attanuation and noise.
If a 48 Volt club car electric motor requires 48 volts, then it should be given a 48 volt power source, or something close to it. Too many more volts and it may burn out; not enough volts and it may not run or it will try to draw too much power and burn out the power supply.
You can increase the speed of an Yamaha 48 volt golf cart by installing a larger motor or more powerful batteries. This will produce more power to the wheels and more speed.
Nope.
no , it will burn out
If you are talking about a 6 volt coil, yes, so long as the contacts are rated for the 230 volt circuit. If you are talking about 6 volt contacts, no, absolutely not.
No
FIU use in Bts for large number of channels
No.
IN BTS -48V IS USED REASON BEHIND IT IS THAT When interference is occur in voltages it affect only positive pulse not in negative terminal so if we make positive common then no interference occur And we get pure -48 volts without any interference. Another reason is that we can use +48 but the lightning has -ve charge due to attraction all the network may destroy so we use the -48 which repel the lightning that make the network safer from great destruction...
-48 v is given to BTS because in this voltage Noise generation is minimum. Because two terminal comes out from the battery and through red color wire we ground the +ive terminal so that possibility of noise interference will get zero because noise occurs only in the +ive terminal that's why we use -ive voltage in the BTS.
No. The value and polarity are different.
In order to install 12 volt lights on a 48 volt cart, you will need to use a voltage reducer to step down the voltage from 48 volts to 12 volts. This will allow the lights to operate properly without getting damaged. You can connect the lights to the 12 volt output of the voltage reducer and follow the wiring instructions provided with the reducer for proper installation. Be sure to follow all safety precautions and consult a professional if needed.
Negative 48 volt DC voltage is simply a voltage that is negative 48 volts with respect to ground. This voltage is widely used in telecommunication systems.
their are many many types of 48 volt systems you need to show or state more info on your system
This is bcoz we need -48V for Gsm BTS, -48 DC is used to control Fluctuation So the main function of this is 1) To convert AC to DC 2) To control overloading
Hello! A BOIA card (or BCF card) is the Base Station Control Function in a BTS. The BCF is like the BTS's brain, controling, for example, TRx's hopping.
B.t.s