0
What else can I help you with?
What technology id used to separate bitumen from sand?
The primary technology used to separate bitumen from sand in oil sands extraction is called hydrotransport, which involves mixing the sand with hot water and chemicals to create a slurry. This slurry is then processed using gravity separation techniques, such as settling tanks or flotation cells, to separate the bitumen from the sand and other impurities. Additionally, methods like steam-assisted gravity drainage (SAGD) and solvent extraction are employed for in-situ extraction, enhancing bitumen recovery from deep reserves.
What is PERL acronym for?
Practical Extraction and Report Language. It is a programming language used by websites and many other things.
What does balsa cement mean?
It's a fast-setting solvent based glue used to put things made of balsa together.
How is petroleum used by humans for energy?
through extraction from pockets deep in the earth and the processing and refinement of crude oil ! but mostly in a combustable engine system (generators) !
What is the term plait point?
A plait point is a term used in liquid-liquid extraction. It is the point where all three phases (in a ternary diagram) are partially soluble in each other. (excuse me if this is wrong)
What is the boiling point of DCM?
Dichloromethane is an organic compound which has a sweet aroma and is used widely as a solvent. The formula is CH2CI2 and is colorless. This solvent has a boiling point of 103.3 degrees F.
For extraction of lipids from seaweeds which is the best method?
One common method for extracting lipids from seaweeds is the Bligh and Dyer method, which uses a mixture of chloroform, methanol, and water. This method is effective in extracting a wide range of lipids from biological samples. Alternatively, supercritical fluid extraction (SFE) can also be used for lipid extraction from seaweeds, offering advantages such as reduced solvent use and faster extraction times.
What is the name of CH2C12?
The name of CH2Cl2 is dichloromethane. It is a colorless, volatile liquid commonly used as a solvent in various chemical reactions and processes.
Why repeated extraction is better than solvent extraction?
Repeated extraction allows for greater efficiency in extracting desired components from a given sample due to the cumulative effect of multiple extraction cycles. This method ensures that more of the target compounds are effectively removed, leading to higher overall extraction yields compared to a single solvent extraction. Additionally, repeated extraction can help to overcome limitations such as incomplete extraction or low solubility that may be encountered with a single extraction.
What purpose does a 1 cm layer of anhydrous sodium sulfate in the apex of the funnel serve while transferring the dichloromethane extract into the round-bottom flask?
Anhydrous sodium sulfate is used as a drying agent to remove microscopic amounts of dissolved water in a solvent. It works by chemically reacting with the water by forming its hydrate, which is insoluble preferably in the solvent in this case dichloromethane. This allows one to filter off the crystals containing the water that would otherwise have remained dissolved in the dcm.
What solvent is crystal of triazophos after formulating it?
Common solvents used to formulate triazophos include acetone, dichloromethane, ethyl acetate, and hexane. The choice of solvent depends on the required solubility, toxicity, and compatibility with other ingredients in the formulation.
What are the names of the separation techniques that are used to get uranium out?
Two common separation techniques used to extract uranium are solvent extraction and ion exchange. Solvent extraction involves using an organic solvent to selectively extract uranium from a liquid mixture, while ion exchange involves using a resin to selectively adsorb uranium ions.
How do you extract safflower?
Safflower oil is extracted from the seeds of the safflower plant through a process that typically involves either mechanical pressing or solvent extraction. In mechanical pressing, the seeds are heated and then pressed to release the oil. In solvent extraction, a solvent, usually hexane, is used to dissolve the oil from the seeds, and then the solvent is evaporated to leave pure oil. After extraction, the oil may be refined to remove impurities and enhance flavor.
What is the reagent catalyst and solvent from aniline to acetanilide?
To convert aniline to acetanilide, the reagent used is acetic anhydride or acetyl chloride. The reaction typically requires a catalyst such as a base, like pyridine, to facilitate the acetylation. The solvent can be a non-polar organic solvent like dichloromethane or toluene, although the reaction can also proceed without a solvent.
What method is used for separating curcumin from turmeric?
One common method for separating curcumin from turmeric is a solvent extraction process using organic solvents such as ethanol or acetone. This method involves grinding the turmeric root into a powder, mixing it with the solvent to extract curcumin, and then filtering and evaporating the solvent to isolate the curcumin.
What is the difference between leaching and extraction?
LEACHING: It is a unit operation where separation is achieved based on preferential dissolution of solute(in solid base) in a solvent EXTRACTION: It is is a unit operation where separation is achieved based on preferential dissolution of solute(in liquid base) in a solvent
What are the properties and uses of ch2 cl2?
CH2Cl2, also known as dichloromethane, is a colorless, volatile liquid with a sweet odor. It is commonly used as a solvent in various industries, such as pharmaceuticals, paint stripping, and chemical synthesis. It has a relatively low boiling point, making it useful for extraction processes. However, it is important to handle CH2Cl2 with caution as it can be harmful if inhaled or absorbed through the skin.
