0
What else can I help you with?
How small of an opening should a lintel be put in?
It's not a question of opening size but a question of loading over the opening. No load, no lintel. If a 12 inch opening is capped with a 16" block, the block is the lintel. If an opening is between wall studs there is little need for anything that would be called a lintel. Anouther name for a lintel is a header. There is usually some kind of header over an opening. A lintel's size and integrity is determined by the load it will support.
What kind of tag requires only an opening tag?
<p> to create a paragraph, you do not need to end a </p> at the end of your paragraph.
Opening code for etv ku band in mediacom MFT930 plus?
dear need me software for mft-930 biss option new thanks
What does Velcro tabs mean?
Velcro tabs refer to small strips of Velcro, a brand of hook-and-loop fasteners, that are used to secure or attach items together. They typically consist of two components: one side with tiny hooks and the other with soft loops, which adhere to each other when pressed together. Velcro tabs are commonly used in clothing, bags, and various household items for easy and adjustable fastening. Their convenience allows for quick opening and closing without the need for traditional buttons or zippers.
How can you be sure your Wi-Fi is secure?
if you need a key to connect to it. if you wanna be more sure theres many more ways to make it more secure like not broadcasting the ssid and also by adding a mac address filter and leaving the firewall settings on. theres also many types of encryptions. like wep which can be 64 bit or 128 bit and wpa which is uncrackable as of yet..
Why do you never pipet by mouth in the chemistry lab?
Pipetting by mouth risks ingesting the chemical you are trying to suck into the pipet. Even if the solution is harmless, you can't be sure that the pipet itself is clean. Who knows what chemical was in it last? Instead, use a pipet bulb or syringe to draw up the solution. These are generally available in any laboratory where you might need to use a pipet.
What are the necessary steps to frame a door rough opening?
To frame a door rough opening, you need to measure and mark the location, cut the opening in the wall studs, install the header and cripple studs, and then secure the frame in place.
How do you remove Marlin 336 extractor?
Remove bolt and secure it in a padded vise with the open end of extractor facing away from you. Take a pair of need-nosed pliers and position each jaw on the edges of the extractor. Give the pliers a firm rap and the extractor will dislodge from the bolt.
How do you install a patio canopy?
Make sure you have a sturdy step-stool. Depending on your brand you may need a pliers, flathead/Philips screwdrivers, or an Allen wrench. Secure one side of the canopy, then the other side. Secure the middle section(s) and make sure it looks nice.
How can I make rings out of wire?
To make rings out of wire, you will need wire cutters, pliers, and a mandrel or round object to shape the ring. Cut a piece of wire to the desired length, wrap it around the mandrel to form a circle, and then twist the ends together to secure the ring. Use the pliers to adjust the shape and size of the ring as needed.
What type of pliers do you need to make jewelry?
You are going to need round nose pliers, flat nose pliers and cutters.You can get them from Walmart or any other hardware store that occupies them.ANS 2 -You would very likely need all these tools in miniature form also. Sets of 3" pliers and cutters are available less than $ 10 in HD and other tool stores.
How can I properly frame a door opening in a wall?
To properly frame a door opening in a wall, you need to measure and mark the location of the door, then install a header above the opening for support. Next, add vertical studs on each side of the opening and a bottom plate at the base. Finally, secure the frame with nails or screws to ensure stability.
Is there a way to remove the headlight assembly from a 1992 Ford Thunderbird without taking it to a garage?
Yes there is! You need to get a pair of pliers (called "snapring pliers")to remove the retainers (the little silver "do-dads" holding the headlight assembly in place... on the back of the grille opening panel). There's 2 of them on each assembly. You get those off and the headlight assembly practically FALLS out!!
How do you remove cigarette lighter on a Audi A4?
you need to use pliers to get it out
in roblox granny i need cutting pliers whare do i put them?
on the wiers
Do you need a special tool to change brake shoes on a 2001 Dodge pickup truck?
A brake spring pliers is a huge help.A brake spring pliers is a huge help.
How can I frame a door opening effectively?
To frame a door opening effectively, you need to measure and mark the dimensions of the door, create a level and plumb frame using lumber, secure the frame in place with nails or screws, and ensure the frame is square before installing the door.
