Fabrics have two widths because that is how they are measured. Fabric has a width and a length to it. It is often sold by the linear yard and is wrapped on a bolt..
. A variety of materials are used for making shoes. Leather fabrics, plastic, rubber, fabrics, wood, jute fabrics, and metal are all materials used in shoe making.
cotton fabrics and asbestos
cotton is a fabric you are not the brightest crayon in the box
Basically this means that the clothes are less likely to wrinkle as compared to untreated fabrics.
To make the feel of the fabric better, like smooth feel, Fragrance, Antibacterial, etc
The most popular fabric widths typically range from 44 to 45 inches (112 to 114 cm) for quilting and apparel fabrics, while upholstery and home décor fabrics often come in wider options, such as 54 inches (137 cm) and 60 inches (152 cm). Specialty fabrics like canvas or outdoor materials may also be available in widths up to 108 inches (274 cm). The choice of width often depends on the intended use of the fabric and the specific project requirements.
A rectangle has 2 equal widths and 2 equal lengths whereas a rhombus has 4 equal widths but they are both 4 sided quadrilaterals.
You can't find the widths of a rectangle with the lengths because the widths can be anything lower than the lengths. Like if your rectangle had a length of 7 the width can be 6, 5, 4, 3, 2, and so on.
You cannot because there is no such thing as a parrallele widths - or even parallel widths.
PR = 2 X Lengths + 2 X Widths (P = 2l + 2w) PS = 2 X Lengths + 2 X Widths (P = 2l + 2w) PT = Perimeter = a + b + c (add the length of the three sides
1/2 mile
(2 lengths) + (2 widths) = (12) + (8) = 20 inches
6 is your answer because the box is 3 lengths and 2 widths and its basicly a 3 by 2 box.
There are several online retailers offering custom draperies. One of the more popular is The Shade Store, which offers many custom options to choose from including lengths, widths, fabrics, borders, linings and more.
A code that consists of vertical lines of different widths is a barcode.
There will be Length/Width widths in 1 length. This will normally be a number that is greater than 1.
You cannot. The lengths and widths are not sufficient information to determine the height.