answersLogoWhite

0

it vibrates

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

Why is rubber-band made of rubber?

A rubber-band is made out of rubber because rubber will make it hold things nice and tight.


What different sound does the pan pipes make?

high and low


How can i make any sound producing gadgets?

After becoming an engineer .


How to make Elastic Band Powered Car?

You build a basic car, with a body and a way to support the front wheels and the back wheels. Each set of wheels should be firmly attached to an axle, maybe a piece of dowel, so that when the axle turns, so do the wheels. Then you need some way to attach the end of a strong rubber band to the middle of each axle so that when you rotate the wheels, the rubber band winds around the axle and stretches tight. You can do this with a small nail or screw put carefully through the dowel. The best way to wind the wheels is probably to push down on the car while you push the car along a surface, like carpet. once the rubber band is really tight, you let the car go, and the stored energy in the rubber band unwinds the axle, and off goes the car You don't have to have the band wind around both axles ... you could make it either just frontal drive or rear-wheel drive, but it probably goes better if you use both axles. You could also use two rubber bands, one for the front wheels and one for the back wheels, with the ends of each rubber band fixed to the middle of the car. Remember, the car will go fastest and the most distance if you use a really BIG strong rubber band, and can wind it up around the axles really really tight. But if you make it TOO tight or too strong, the car or the axles might break when you wind it up, which is not good and really annoying. Another way of making a car like this is to make it like the rubber-band powered toy airplanes. Make a light frame with 4 wheels, and buy a little toy propeller or take it off a toy airplane, then wind up the rubber band by winding the propeller. Then when you let go the propeller, it will drive the car along.


What is the most aerodynamic material?

Generally the aerodynamic capability or aerodynamic strength of a material depends on its structure but not the material that it was made of. so even if we make a wing of some model plane using a steel like material and plastic like material with same design , both may show up same result (with in their elastic limits, until they break), so depending on elastic limits, we choose materials like aluminium and some alloys of it, since it is having lighter weight and higher elastic constants.

Related Questions

Why does the elastic band make a sound when plucked?

When an elastic band is plucked, it vibrates rapidly back and forth, producing sound waves in the air. These sound waves reach our ears and are interpreted by the brain as sound. The pitch of the sound depends on the frequency of the vibrations produced by the elastic band.


Why does an elastic band make asound when plucked?

When an elastic band is plucked, it vibrates rapidly back and forth. This vibration creates sound waves in the air, which we perceive as sound. The pitch of the sound is determined by the frequency of the vibration, with higher frequencies creating higher pitch sounds.


How loud is an elastic band?

Elastic bands will hurt when pinged and do not make a very large sound in fact nothing to disturb anyone really


What sound does the zither make?

It makes a plucked sound similar to a harp.


Why does a rubber band make sound energy when it vibrates?

When a rubber band is plucked or stretched and released, it vibrates back and forth rapidly. The vibration causes the molecules in the rubber band to collide, creating sound waves that travel through the air. This propagation of energy in the form of sound waves is how a rubber band generates sound when it vibrates.


How do you make elastic pant cuffs?

Elastic pant cuffs can be made by sewing an elastic band inside the hem of the pants. Use a seam ripper to loosen the threads of the hem, then insert an elastic band and resew the hem.


How does plucking the string with fingers help to make a sound louder?

The sound becomes brighter when strings are plucked and only seems to be louder.


What vibarte on a drum to make a sound?

it depends what kind of drum. some drums have a simple elastic band that vibrates, and a snare drum, has some metal snares, that's why its called that.


How do you make a force meter measuring in newtons with a elastic band?

To create a force meter measuring in newtons with an elastic band, you can attach the elastic band to a stationary object and hang a known weight from the other end. Measure the elongation of the band and use Hooke's Law (F = kx) to calculate the force in newtons, where F is the force, k is the spring constant of the elastic band, and x is the elongation.


How do you make a newton scooter without a balloon?

use a rubber band or an elastic


When does sound energy begins?

sound energy begins with mechanical energy because when you plucked a guitar you make a mechanical energy and then that cause the strumming of guitar


How about a soft elastic band on briefs for men?

> Mark H. Schneider > markhschneider@yahoo.com> wrote:> How about making a soft elastic band on mens briefs?I now fold them over a couple> of times to make them more comfortable.