0
What else can I help you with?
Why the capacity differ at theoretically and actually at screw conveyor?
The capacity of a screw conveyor can differ between theoretical calculations and actual performance due to several factors. Key influences include variations in material characteristics such as bulk density and moisture content, which affect flowability and friction. Additionally, wear and tear on the conveyor components, improper installation, and changes in operating conditions can lead to inefficiencies, reducing the actual capacity compared to theoretical estimates. Lastly, the design parameters, such as screw pitch and diameter, may not align perfectly with the actual conditions of use, further impacting performance.
What do yield engineers do?
It is important to check the yield because we must be confirn that mix we are getting in actual is equal to the theorotical mass of concrete.
Why is the theoretical value for modulus of elastricity for mild steel is different from the calculated value?
because it is the ratio of the stress to the strain and in actual condition the strain developed is different from the theoretical .
What is fill factor?
Fill factor is the ratio (or the difference) between the actual output of a solar cell or panel, and its theoretical output (which can be about 30%higher).
Why there should be difference in actual loads and theoretical calculated loads?
The theoretical loads being calculated should be higher than the actual loads that will be used in reality because the weight capacity of a structure, vehicle etc. should exceed the amount of weight it is intended to actually hold. This is true for any type of load, driveshafts, shirt buttons, whatever.
Is actual yield greater or less than theoretical yield?
The actual yield is less than the theoretical yield.
What is the difference between actual yield and theoretical yield?
Theoretical= calculated
Would the percent yield be different if the actual yield and theoretical yield were in units of moles?
No, the percent yield would not be affected by the units of the actual and theoretical yield as long as they are consistent. Percent yield is calculated as (actual yield / theoretical yield) x 100%, where the units cancel out in the division.
The actual yield of the given reaction is 14.4what is your percent yield?
To calculate percent yield, you would use the formula: (actual yield / theoretical yield) * 100%. If the actual yield is 14.4 and the theoretical yield is not provided, the percent yield cannot be calculated accurately without the theoretical yield.
Is actual yield greater or less than the theoretical yield?
The percent yield is the ratio of the actual yield to the theoretical yield. A mole ratio is a conversion factor derived from the coefficient of a balanced chemical equation interpreted in terms of moles.
What is the percent yield of 122 grams of product?
If this is the actual yield, real amount produced, then you need the theoretical yield to find the percent yield. % yield = (actual yield / theoretical yield) x 100
How calculate the percantage yield in balanced chemical equation?
To calculate the percentage yield in a balanced chemical equation, you first need to determine the theoretical yield (the maximum amount of product that can be formed based on stoichiometry). Then, measure the actual yield produced in the lab experiment. Divide the actual yield by the theoretical yield, and then multiply by 100 to get the percentage yield. The formula is: (actual yield / theoretical yield) x 100%.
Is experimental yield the same as percent yield or actual yield?
Experimental yield and actual yield refer to the same thing, which is the amount of product obtained from a chemical reaction in a laboratory setting. Percent yield, on the other hand, is a measure of the efficiency of a reaction and is calculated by comparing the actual yield to the theoretical yield.
How do you calculate percentage yield?
# Determine the limiting reagent; # Calculate the expected yield if the reaction goes to 100% completion. # Divide the actual yield by the expected yield and multiply by 100. The result is percentage yield.
Two ways that the theoretical yield differ from the actual yield?
A yield is received after a person does the experiment. Second, they can never be same values. We can only get close to theoretical yield but never attain similar values under normal experimental conditions.
If the actual yield of Mg3N2 is 47.87 g and the theoretical is 50.26 g What is the percent yield?
Percent yield = Actual Yield / Theoretical Yield * 100 hope that helps :)
HOW TO calculate percentage yield?
actual yield multiply by 100 = % yield theoretical yield
