High frequency is used because of the the size of antennas used to transmit and receive the communications signal. The higher the frequency the smaller the antenna.
Depends on what you mean by high frequency. The rabbit ears antenna used in broadcast TV is a dipole and is used for VHF.
A: It is a terminology to imply that the scanner will be used at the hi end of frequency as opposed to low frequency
2.4GHz is used & OFDM
Radio Frequency is a wireless technology consisting of a transmitter and receiver tuned to the same frequency
Demodulation takes place to extract the low-frequency signal from the high-frequency carrier, using a nonlinear process that produces components at the signal frequency. The LP filter is used to eliminate the high-frequency carrier component from the signal so that it does not cause problems at a later stage in the amplification of the signal.
High frequency waves have a short wavelength and high energy. They can travel long distances and penetrate through obstacles easily. High frequency waves are commonly used in technologies like radio communication and medical imaging.
The telephone frequency range used for communication typically falls between 300 Hz to 3.4 kHz.
Radio communication typically uses electromagnetic waves in the radio frequency range, specifically in the Very High Frequency (VHF) and Ultra High Frequency (UHF) bands. These waves have wavelengths that are suitable for transmitting signals over long distances and are commonly used for broadcasting, two-way radio communication, and cellular communications.
Sending out a pulse of high frequency radio waves involves transmitting electromagnetic radiation at a fast rate. This can be used for applications such as communication, radar systems, and medical imaging. The high frequency allows for fast transmission and reception of data or information.
The downlink frequency to Earth, in the context of communication satellites or spacecraft, refers to the frequency at which data is transmitted from the satellite to Earth. The specific frequency used can vary depending on the satellite system and the communication protocol being employed. Generally, downlink frequencies for satellite communication are in the microwave frequency range, typically between 1 to 50 GHz. The choice of downlink frequency is influenced by factors such as transmission range, atmospheric absorption, and regulatory requirements.
Low frequency waves have longer wavelengths and lower energy compared to high frequency waves. They can travel long distances and penetrate obstacles like buildings and walls. Low frequency waves are commonly used in radio communication, submarine communication, and medical imaging techniques like MRI.
Ultrasound has a frequency higher than the upper limit that humans can detect, which is typically around 20,000 Hz. This type of sound is used in various applications such as medical imaging, cleaning, and communication.
High frequency signals have a short wavelength and high energy. They are used in applications such as telecommunications, radar systems, and medical imaging. These signals can carry large amounts of data quickly and are also used in wireless communication technologies like Wi-Fi and cellular networks.
the frequency used in mobile communication should be greater then 30mhz so cannot be reflected by the ionosphere thats why we are using a frequency of range less ghz so called "radio waves"
UHF (Ultra High Frequency) is commonly used for television broadcasting, two-way radio communication, GPS systems, and RFID (Radio Frequency Identification) technology. It is also utilized for wireless networking, satellite communication, and remote control devices.
High frequency waves have short wavelengths and high energy. They are used in various applications such as telecommunications, radar systems, medical imaging, and industrial processes. These waves can penetrate materials and provide detailed information for imaging and communication purposes.
3 - 30 megahertz is a frequency range within the radio frequency spectrum, commonly used for radio broadcasting, television broadcasts, and various communication systems. It falls in the low frequency range compared to higher frequency bands like microwaves or infrared.