A conventional voice radio cannot transnit data directly. Data digital voltage levels must be converted to audio using a device called a modulator, whichapplies the audio to the transmitter.
conversely,at the receiver,a demodulator converts audio back to digital voltage levels.
RF-5000 radios=>(build in)Highspeed modems,,,,,, which have Modfulator and demodullator(which permit the radios to operate with either voice or data inputs)
on the other side FSK(Frequency shift keying) only encoded binary data(0s and 1s).....
This case, Fsk is not suitable for high speed modems..............
Sandip Layek.
in point to point millitary communications , earlier telephone modems etc....
The three main types of shift keying are Amplitude Shift Keying (ASK), Frequency Shift Keying (FSK), and Phase Shift Keying (PSK). ASK encodes data by varying the amplitude of the carrier signal, FSK uses different frequencies to represent data bits, and PSK changes the phase of the carrier wave to convey information. Each type has its own advantages and applications in digital communication systems.
In television system for video transmission AM is used and for audio transmission FM is used....
Binary (Bipolar) Phase Shift Keying.
In FSK the output frequency is dependent on the input bit stream. Here 2 (for Binary FSK) different carrier frequencies are used and they are switched according to input bit stream. When input is at logic1 output is freq. f1 and when input at logic0 output is freq. f2, where f1 and f2 are different.
fsk is nothing but frequency shift keying which is used in low speed modems.....
Like in modems, you make digital zeros one frequency and digital ones another frequency.
in point to point millitary communications , earlier telephone modems etc....
Envelope detection is used in an M-ary Frequency Shift Keying noncoherent modular because LOs are not required. Moreover, an estimate of 1dB of more power compared to the Frequency Shift Keying coherent demodulation.
Frequency shift keying in digital communication and Frequency modulation in analog communication..........
Amplitude shift keying changes the height/power of the transmitted signal without altering the frequency. Frequency shift keying changes the frequency of the transmission without altering the height/power of the transmitted signal. Morse code is an example of amplitude keying where the amplitude is 0 or 100%. RTTY teleprinter uses FSK with two frequencies and the codes that represent text characters are sent with patterns of the two frequencies.
amplitude shift keying is a form of modulation in digital signal that variation in the amplitude of carrier wave. application of ask: *used mainly for radio frequencies
It uses GFSK (Gaussian Frequency Shift Keying) modulation technique.
The three main types of shift keying are Amplitude Shift Keying (ASK), Frequency Shift Keying (FSK), and Phase Shift Keying (PSK). ASK encodes data by varying the amplitude of the carrier signal, FSK uses different frequencies to represent data bits, and PSK changes the phase of the carrier wave to convey information. Each type has its own advantages and applications in digital communication systems.
FSK stands for Frequency Shift Keying, a digital modulation technique used in telecommunications. It conveys digital data by varying the frequency of a carrier wave, representing binary values as different frequency shifts. This method is commonly used in applications like radio communications and modems, where robust data transmission is essential.
Block digram of fsk is the representation of fsk modulation
The disadvantage of frequency shift key is it requires high bandwidth. The advantages of it are that frequency shift keying promotes long distance communication, it has high security, low noise, efficiency is high, and decoding of signal is easy.