Yes. In order to do work, there has to be a load. In order for there to be current, there has to be a load. Now, that is probably not what you meant to ask. If so, please restate the question correctly.
A relay is basically a controllable switch that connects a supply voltage to a load. If the relay is switch such that the load is not connected, that could be considered an open load. If it is switched the other way the load will be connected to its supply voltage. A defect in a relay would be something that caused it not to function correctly. It could be in the switch portion of the supply portion of the relay. Hence you are referring to different things and a defect may or may not cause the load to be open.
'Balanced loads' apply to three-phase a.c. loads. A three-phase kilowatt hour meter will measure both balanced and unbalanced loads, when correctly connected.
A: It is not important what is important it that the capacitor has the correct polarity across its terminals otherwise it will not function correctly
Ratio of Average load to Maximum demand for a given period (for a day, month or year) is termed as Load factor or Plant Load Factor (PLF). Load Factor = Avg. Load*24/Max Demand*24 ......... For a Day. This Load factor is very important in the sense of calculating the overall generation cost. It is always less than 1. Higher the LOAD FACTOR of a power station,lesser the overall per unit generation cost of the power station.
It does load correctly most of the time. Like all websites there are glitches from time to time.
Here are 3!For the rest of the week, in their famously undisclosed location, the accountants will tabulate and re-tabulate..Hotel guests aren't an accurate way to tabulate, since many tourists stay with family or friends.Meanwhile, the electronics could tabulate votes quickly, as our impatient society demands.
The word "tabulate" does not appear in the text of "The Giver" by Lois Lowry.
"Tabulate," is a verb meaning, 'to count or record.' An example sentence could be:"Please, return to your seats while I tabulate the results," said the judge. - Alvin Journeyman
Usually the load center and the breaker have to be of the same manufacturer to operate correctly.
Happy
Yes. In order to do work, there has to be a load. In order for there to be current, there has to be a load. Now, that is probably not what you meant to ask. If so, please restate the question correctly.
You write the numbers in the form of a table.
A load test is used to confirm that a manufacured piece of equipment is working correctly before it leaves the factory.
A device that was designed to tabulate polynomial functions
para maano cya maboang
para maano cya maboang