answersLogoWhite

0

Roof ventilation is necessary so that the air is in constant circulation keeping moisture levels low causing less future damage. Roof ventilation also increases energy efficiency in warmer climates.

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Engineering

What type of roof structure ventilation is considered superior?

ridge vent and powered


Why do you need roof ventilation?

Condensation forms in roof spaces and can be severe. Water droplets can drip ontoinsulation material or the ceiling of the room below. If there are timber roof trusses (beams) then severe condensation will cause rotting of timber which could lead to wet rot or even worse dry rot. Good ventilation will stop the build up of moisture. Improper roof ventilation may dramatically lessen the life of a roof and void your shingle warranty. The shingle manufacturer has specific guidelines for the amount of ventilation you need based on attic square footage. Attic ventilation is very important as too little will literally cook your shingles; which, will cause them to be brittle and this will make susceptible to wind, hail and storm damage. Your utility bills may also suffer as the excess heat from your attic may radiate through your ceiling and cause your air conditioner to run excessively.


What is the purpose of the ventilation pipe in a plumbing system?

It allows the drains to flow freely and the stench of the sewer to be sent to the highest point in the roof. That is why p-traps are installed, so the sewer gasses go to the roof vents and not through the water in the traps.


What is the average cost to install ventilation on your roof?

Normally it's not a very big project however it takes knowledge and experience to achieve the proper effect. It always depends on lengths and highest of roof. A walkable pitched roof I's always cheaper starting from around $150-$500 a more steep roof could start at $300-$1000 depending on amount of staging needed


What is the compression-ventilation ratio for a lone rescuer?

30 compression and 2 ventilation

Related Questions

Why is ventilation necessary?

Roof ventilation is necessary so that the air is in constant circulation keeping moisture levels low causing less future damage. Roof ventilation also increases energy efficiency in warmer climates.


Why are roof nails sweating in attic-- no roof leaks?

Not enough ventilation. Moisture from inside the house is condensing on the underneath side of the roof.


What are the pipes on my roof used for?

The pipes on your roof are used for ventilation and to release gases from your home, such as those from plumbing and heating systems.


How can I ensure proper ventilation and weatherproofing on my roof by installing ridge cap?

You can ensure proper ventilation and weatherproofing on your roof by installing a ridge cap. The ridge cap is a protective covering that goes along the peak of the roof, allowing for proper airflow and sealing out water and debris.


What type of roof structure ventilation is considered superior?

ridge vent and powered


What are the best practices for ensuring proper hip roof ventilation in a residential building?

Proper hip roof ventilation in a residential building can be ensured by installing soffit vents for intake and ridge vents for exhaust. This allows for continuous airflow, preventing moisture buildup and extending the lifespan of the roof. It is important to maintain a balanced ventilation system to avoid issues such as mold and ice dams. Regular inspections and maintenance are also key to ensuring effective ventilation.


Are gable vents necessary if there are roof vents?

Gable vents are actually counter productive when used with ridge vents. It is better to have ventilation at the soffits which will create a draft drawing in cooler air and exhausting it through the ridge.


What causes the wood roof to deteriote under the roofs tiles or singles?

Not enough ventilation under the roof and moisture collects on the underneath side.


What is the purpose of having roof vents?

The purpose of having roof vents are the following; preserving the life of the roof, reducing the moisture inside the roof, maintaining the right ventilation inside the roof to avoid molds and moisture and for aesthetic and style purposes as well.


I have a phobia of ventilation in toilets the ones on the roof I can't use a toilet if there is one there Is there a name for this phobia and is it normal?

A phobia for ventilation in toilets is not normal and has no specific name.


Why does a Stevenson screen have two roof layers with an air space in between?

the roof is double layered with provition for ventilation of the space between the 2 layers


How can I properly install a roof vent to improve ventilation in my home?

To properly install a roof vent for better home ventilation, follow these steps: Choose the right type and size of vent for your roof. Locate the best position on the roof for the vent. Cut a hole in the roof and install the vent according to the manufacturer's instructions. Seal around the vent to prevent leaks. Ensure proper airflow by keeping the vent clear of obstructions.