0
What else can I help you with?
Why is the wattmeter connected at the primary side of the transformer?
In general, you can install a wattmeter on the primary or the secondary side of a transformer (it depends what you are trying to measure). But if you are conducting an open- and short-circuit test (to find the transformer's losses), then the wattmeter is connected to the primary side because you want to measure the total (primary + secondary) losses and that is only achievable from the primary side.
Difference between input and output transformer?
The 'input' side of a transformer is called its 'primary' side, whereas the 'output' side is termed its 'secondary' side. The ratio of its secondary to primary voltage is equal to the ratio of the number of turns in the secondary windings to the number of turns in the primary winding. So if, for example, a transformer's secondary winding has twice as many turns as its primary winding, then the secondary winding will produce twice the voltage applied to the primary winding.
Where Tap changer placed in transformers primary side or secondary side?
It's installed on the high-voltage side.
If a dc voltage of 12v is added to the secondary of step down transformer and rating of transformer is 220 input and 12v output what will be the result from primary of transformer?
Adding a DC voltage to the secondary of a transformer will not have an effect on the primary side, as transformers work on the principle of electromagnetic induction which is based on alternating current. The primary side of the transformer will still operate based on the input AC voltage of 220V. The DC voltage on the secondary side will not be transferred to the primary side.
Where is the high side of transformer on open circuit test?
high voltage side call primary
Operation of on load tap changer in transformers?
OLTC - INSTALLED IN THE PRIMARY SIDE OF A POWER TRANSFORMER TO SELECT OR ADJUST VOLTAGE. THE ADVANTAGE OF THIS IS FOR SOLVING THE VOLTAGE DROP ISSUES IN THE SECONDARY OUTPUT IN THE FARTHEST LOCATION. FOR EXAMPLE YOUR SECONDARY VOLTAGE REQUIREMENT IS 380 VOLTS AND YOU CAN ADJUST TO 400 VOLTS FOR LONG CABLE RUNS.
Where is the heart situated in the body of vertebrates?
The heart is situated on the central side of the thoracic cavity
Where is liver situated?
The liver is situated on the right side of the abdomen just below the ribs and the diaphragm which separates the chest and the abdomen
What ocean is situated to the east side of Africa?
the Indian ocean
What is the difference between primary and side effect?
Primary is the main thing that happens. The side effect is what happens because of the Primary thing.
Houses composed of two apartments situated side by side are called?
A house composed of 2 side by side apartments is called a duplex.
Is dorsal same as lateral?
Dorsal is situated on the upper part and at the rear of a body, lateral is situated at the side
Which side is redbridge from London?
Geographically, Redbridge is situated in northeast London.
Why you uluminium on primary side of transformer?
This isn't the case. You can have aluminium or copper on primary or secondary side of a transformer.
Where is the hooter horn situated on the Corsa 2006 1.4?
The horn is situated at the front of the engine compartment. The horn will be to the left of the drivers side headlight assembly.
Why is the wattmeter connected at the primary side of the transformer?
In general, you can install a wattmeter on the primary or the secondary side of a transformer (it depends what you are trying to measure). But if you are conducting an open- and short-circuit test (to find the transformer's losses), then the wattmeter is connected to the primary side because you want to measure the total (primary + secondary) losses and that is only achievable from the primary side.
Where is the battery in a 98 BMW m3?
It is in the trunk, situated on the right hand side.
