answersLogoWhite

0

To prevent injury.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

What is the rule of overlapping rebars in the concrete?

The rule of overlapping rebars, also known as the lap splice length, dictates the minimum length that two reinforcing bars (rebars) must overlap to ensure effective load transfer between them. This overlap is typically specified as a multiple of the diameter of the rebar and is influenced by factors such as the type of steel, the concrete's strength, and the environmental conditions. Properly splicing rebars helps maintain structural integrity and prevents potential failure in concrete structures. Always refer to relevant codes and standards, like ACI or Eurocode, for specific requirements.


Comparison between BS and ASTM specification for steel rebars?

C 11 specification


What the unit weight of the rebars 16mm?

The unit weight of 16 mm reinforcement is 1.58 kg/m


What is the meaning of waist slab?

Waist slab is used in case of stairs. The rebars are bent at some angles on which steps are built.


What is tensile strength of tor steel?

Rajuri Thermex TMT500 rebars have excellent bend properties due to the unique ductility (elongation values) obtained when using the German HSE Thermex Technology.Corrosion Resistance propertiesControlled water-cooling prevents the formation of coarse carbides, which has been cited as the main cause for the corrosive nature of common bar.Another reason for better corrosion resistance is the absence of surface stresses caused by the cold twisting (and Torsteel) process.WeldabilityRajuri Thermex TMT500 rebars with carbon content less than 0.25% can be used for butt and other weld joints without reduction in strength at the weld joints.Fire ResistanceUnlike Torsteel and CTD Rebars, Thermex bars have high thermal stability. They are the preferred choice when elevated temperatures of 400-600 C may be encountered (Chimneys, fires).Earthquake ResistanceThermex rebars have high fatigue resistance to Dynamic/ Seismic loads due to its higher ductility quality. This makes Thermex bars most suitable for use in earthquake prone areas.FormabilityDue to very high elongation values and consistent properties through out the length of bar, Thermex rebars have excellent workability and bendability.Strain AgeingDue to unique and scientific manufacturing process and chemical composition, Thermex rebars show no tendency of embrittlement either during welding or cold deformation of welded joints.Cost EffectiveThermex TMT rebars required 15-20% less usage than CTD bars for same work with cost 5% more than than CTD bars. This results in overall saving of 10-25%.

Related Questions

What words have letters b r r e a s?

rebars


Did Michael Jackson get his teeth capped and when?

No he has never had his teeth capped.


When was Capped langur created?

Capped langur was created in 1843.


When was Capped Heron created?

Capped Heron was created in 1783.


What is massachsetts state bird?

The Massachusetts state bird is a black- capped chickadee.


What is the rule of overlapping rebars in the concrete?

The rule of overlapping rebars, also known as the lap splice length, dictates the minimum length that two reinforcing bars (rebars) must overlap to ensure effective load transfer between them. This overlap is typically specified as a multiple of the diameter of the rebar and is influenced by factors such as the type of steel, the concrete's strength, and the environmental conditions. Properly splicing rebars helps maintain structural integrity and prevents potential failure in concrete structures. Always refer to relevant codes and standards, like ACI or Eurocode, for specific requirements.


How many syllables are there in white capped?

"White capped" has two syllables.


Comparison between BS and ASTM specification for steel rebars?

C 11 specification


What is the constant value from cubic meter of concrete to determine weight of rebar?

There is no constant value for the ratio of the rebars and concrete volume. The rebars depends on the structural designer's safety factor and the factors affecting the framing like wind, earthquake and soil.


Is a black-capped chickadee dormant?

Black-capped chickadees are non-migratory.


What is massachusett's state bird?

Black-Capped chickadee


What is a snow capped mountain?

A snow capped mountain is a mountain with snow on the top if it.