Why should we use vernier scale or micrometer instead of a meter stck?

Answer 1

list down the advantages and the disadvantages of the micrometer screw gauge over vernier caliper

Answer 2

There are a number of advantages and disadvantages of using Vernier caliper. The pros include easy to use, simple to understand and it is portable. As for cons, the accuracy is not definite, it may cause serious injuries while using it and so much more.

+++

The pros yes - the cons, no. Completely wrong. Provided the instrument is of reputable manufacture, and used and looked after properly, it is very accurate down to its limit of resolution: typically 1/1000" or 0.01mm. As for the risk of serious injury - if you think that you do not know how to use it. The worst you might do is scratch your hand on the jaw points, anyway. The only other real "con" I can think of is that if your eye-sight is weakening the vernier is not so easy to read.

Answer 3

One disadvantage of a tape measure is you can cut yourself when retracting it . Another is as it gets older the stop that you use to hold the tape against a piece of lumber becomes loose with age and can give an inacco=urate measurement in critical situations where an exact measurement is crucial like in a cove moulding outside corner cut.

Answer 4

Die beide sind die gleichen dinge.. Es gibt keinen unterschied zwischen ihnen. Deswegen muessen Sie darueber gar nich denken. ES freut mich sehr,..... VEILEN DANK.. uebrigens bin ich ernsthaft..

Answer 5

The vernier calipers is used to measure length of small objects to an accuracy of 0.01 centimeters.

Answer 6

A Vernier caliper has an accuracy of 0.1mm, The meter stick(ruler) however, has an accuracy of only 1mm.

Answer 7

Accuracy and precision of measurements made with the instrument.

Answer 8

Vernier scales or micrometers are used to measure very small sizes - sizes that can't be measured accurately with a meter stick.

Answer 9

advantage of using caliper

Answer 10

it is easy to handle and less cost