An analog signal is simply a quantity varying continuously over time..But because
we are interested in information and communication, we are usually interested in
rapidly varying signals that have some underlying periodicity. Therefore we use sin wave
An analog signal is one which is continuous in time as well as continuous in amplitude . Example : sine wave, cosine wave. An Digital signal is one which is continuous in discrete in time. Example : square waves.
One with a continuous signal wave.
No and yes. Digital signals are usually square or pulse waves. By Fourier analysis, however, every periodic wave, even a square wave, is the summation of some series (often infinite) of sine waves.
analog sensor
The signal that changes at a higher rate occupies greater bandwidth.
A: ANALOGUE IT can be AC or DC it is up to the application involved An analog signal can be a sine wave, a square wave a sawtooth wave or any other varying waveform
Should be a sine ( or cosine) wave.
Sine wave is considered as the AC signal because it starts at 0 amplitude and it captures the alternating nature of the signal. Cosine wave is just a phase shift of the sine wave and represents the same signal. So, either sine or cosine wave can be used to represent AC signals. However, sine wave is more conventionally used.
An analog signal is one which is continuous in time as well as continuous in amplitude . Example : sine wave, cosine wave. An Digital signal is one which is continuous in discrete in time. Example : square waves.
Yes. A signal of plateaus shows quantized or discrete levels of one or the other voltage; only 2 states. A sawtooth signal has a spectrum of states and has many more than 2 discrete states and is thereby analog. A sine wave is also an example of an analog signal - a spectrum of intensity.
The sine wave, with its repeating pattern, can represent a single frequency with no harmonics.
It is more reasonable to use square wave rather than sine wave signal to determine slew rate. Both signal sources serve as a functional generator with the sine wave providing high purity waves.Ê
One with a continuous signal wave.
Yes, it is
A coder can accept any kind of analog signal while demodulator can only accept a modulated sine wave. Then they generate the digital signal.
A coder can accept any kind of analog signal while demodulator can only accept a modulated sine wave. Then they generate the digital signal.
if a signal is not a pure sine wave it must contain harmonics