a straight under G means its for direct current or if its zig zag its for alternating current...
When there is a trigger for the event,: Example: When you need to determine if a grade passed or not. Start->input grade(input or output)->is G>=75?(i just put 75 because the passing here is 75%, and use decision symbol, now there are two flowlines that will come out of the decision symbol, follow this: right- TRUE, down- FALSE, use a processing symbol then, if true...)->print pass(processing symbol, true, right of the DS, if false...)->print failed(processing symbol, false, down of the DS) then make sure that the end terminal would below the false, then in case you might wonder if the TRUE will be left, just use a flowline to connect it on the flowline before the end(i mean between the false Processing box and the end terminal)! So i hope that helps you! Rekun- peace out!
Any subset X ⊆ nodes(G) induces a subgraph G[X] of G, where G[X] has nodes X and G[X] contains all arcs of G which join nodes in X.G′ is a full (or induced) subgraph of G if G′ = G[X] for some X ⊆ nodes(G).Iain Phillips Lecture Notes 2008
Before we look at the complimentary mRNA sequence of the given DNA sequence, let us remember that RNA contains uracil (U) in place of Thiamine (T) The querry sequence is: t-a-c-c-t-c-g-c-a-a-c-t So the mRNA sequence would be: A U G G A G C G U U G A
import java.util.Scanner; import static java.lang.Syatem.out; class Student { public static void main (String ar[]) { Scanner sc = new Scanner (System.in); System.out.println("Enter % of Student : "); int G = sc.nextInt(); { if(90=<G) && (G=<100) System.out.println("Grsde is A+"); else { if(80=<G) && (G=<99) System.out.println("Grsde is A"); else { if(70=<G) && (G=<89) System.out.println("Grsde is B+"); else { if(60=<G) && (G=<79) System.out.println("Grsde is B"); else { if(50=<G) && (G=<69) System.out.println("Grsde is C+"); else { if(40=<G) && (G=<59) System.out.println("Grsde is C"); else { if(34=<G) && (G=<39) System.out.println("Grsde is D+"); else { if(G=33) System.out.println("Grsde is D"); else { if(G<32) System.out.println("Grsde is Fail"); else System.out.println("Invalid Entry"); } } } } } } } } } } }
Uppercase 'I' is used for DC or effective (RMS) alternating current (which is a scalar value). Lowercase 'i' is used for instantaneous current (usually expressed as a complex value).
The Underline below symbol G represent about flow of current,if the line is straight it shows direct current,and if it is zig-zag then it is alternate current.
IG=Betanx. in this G is G.constant, I is current, Be is Megnetic field of earth, OK? or anything else?
By attaching a resistance in parallel connection with the galvanometer. Or when a low resistor connected in parallel with galvanometer ,the galvanometer is converted in ammeter. and the resistor is called shunt resistance.
A galvanometer is an instrument used to measure and detect electric currents. While that seems a lot similar to an ammeter, it only deals with measuring relatively small or mediocre currents. Although an ammeter is now much preferred due to its more accurate, faster, and advanced readings, there is a way to "convert" a galvanometer to function like an ammeter. A current separator or divider, known as a shunt, allows a simple meter to be calibrated (adjusted) to measure larger currents. The shunt, parallel to the coil of your galvanometer, allows more electric currents to circulate around the circuit, thus obtaining more current.
It is defined as the current which produces a deflection of one scale division in the galvanometer and is given by, G= k/NBA where, k is the torsion constant. N is the number of turns in the coil B is the magnetic field and, A is the ares of cross section of the coil.
g
g
g
The chemical symbol for gold is Au
The symbol for gold is AU because it comes from its Latin name, Aurum. The symbol "G" is already used for the element germanium.
no element has the symbol G
If, for example, the lowest G is the first G below middle C, this G would be in the space below the second ledger line below the stave (with the G clef (treble clef). The next note, A, would be on the second ledger line below the stave, the next note, B, will be in the space below the first ledger line, then middle C, and the notes D, E, F and G (that completes the first octave) will be on consecutive spaces and lines above middle C, so that the G completing the first octave will be on the second line on the stave. The second octave will continue with the A in the second space from the bottom, the B on the line above, and the C, D, E and F will be on the consecutive spaces and lines above. The G that completes the second octave will be in the first space above the stave. Also, both F notes will will have a sharp symbol to the left of them ( like a hash sign), unless this symbol appears after the treble clef symbol at the start of each stave.