0
What else can I help you with?
What can connect all the components in a circuit so that an electric current can flow?
Wires
A complete electric circuit includes a voltage source current wires and something to ground the flow of current?
If you ground the flow of current like the last part of your question states you will not have a complete circuit as the circuit will open on a short circuit. To make a complete circuit operate you need a power source, an overload device to protect the conductors of the circuit, conductors to carry the current and a load across the power source which causes the current to flow in the circuit. Leave any one of these things out and you will not have a complete circuit.
What is the relationship between resistance and current in a resistive circuit?
:) It's connected together
What is the difference between a series electric circuit?
A series circuit is a circuit that only has one path for current to flow on, a parallel circuit is a circuit that has multiple paths for current to flow on. Parallel circuits are mostly used, especially in your house/home. The reason of that is because, if a device in a series circuit electrically malfuctions or goes down, it will stop the current flow, thus ending and cuting the whole rest of the circuit. In a Parallel circuit, if a device electrically goes down, current will still be able to flow through the other circuit branches, and the rest of the circuit, thus keeping electricity flowing.
What do you need to complete before the current will flow?
A circuit must have three basic components to make electricity flow. 1. Source of power or electricity. 2. Wires, switches and conductors through which the current can flow. 3. And finally a load to complete the circuit.
Do neutral wires carry current in an electrical circuit?
No, neutral wires do not carry current in an electrical circuit. They are used to complete the circuit and provide a return path for the current to flow back to the source.
How a fuse controls the flow of electric current in a circuit?
A fuse does not control the flow in a circuit, it limits the current in a circuit. If the load in a circuit shorts out the fuse link melts and opens the circuit and stops the current flow and prevents the wires feeding the circuit from melting and catching fire. resist
What can connect all the components in a circuit so that an electric current can flow?
Wires
Are wires and a light bulb needed to make current flow?
No, not at all, current can flow between any two opposite poles. Usually a power source and wire are used, but current flows through lightning and such.
When the wires are connected to the terminals of the battery what causes electric current in a circuit?
The resistance of the load is what causes an electric current to flow in a circuit.
Which electrical protective device is designed to detect a difference in a current between circuit wires and interrupt the circuit and stop the flow of electricity?
A resistor is a device designed to detect difference in current and stop the flow of electricity. On most every type of electric engine or circuit has a resistor.
When wires are connected to the terminals of a battery. what causes electric current in the circuit?
The electric current in a circuit is caused by the flow of electrically charged particles, typically electrons, through the wires. When the battery is connected, it creates a potential difference (voltage) that pushes the electrons to move from the negative terminal to the positive terminal, creating a continuous flow of current in the circuit.
What is the relationship between current and capacitance in an electrical circuit?
The relationship between current and capacitance in an electrical circuit is that capacitance affects the flow of current in the circuit. Capacitance is a measure of how much charge a capacitor can store, and it influences the rate at which current can flow through the circuit. A higher capacitance can result in a slower flow of current, while a lower capacitance allows for a faster flow of current.
How many wires must a current have?
Current needs only one wire to flow in, but a circuit needs at least two wires to connect the source to the load.
Will electricity pass through 2 wires?
Yes, electricity can pass through two wires if they are connected in a circuit where there is a complete path for the electricity to flow. If the wires are not connected in a closed circuit, the electricity will not flow between them.
What is an electric circuit that provides an uninterrupted path for a current to flow?
A closed circuit is one that provides an uninterrupted path for a current to flow. This means that the circuit is complete, allowing electricity to travel from the source (like a battery) through the wires to the load (such as a light bulb) and back to the source. If the circuit is open or broken, the current will not flow.
Why an electric connection has 2 wires?
Two wires are needed so that the electric current has a circuit to flow round. For a simple circuit, the voltage between the wires, multiplied by the current in amps, gives the power in watts, which is how fast energy is used up (joules per second). Also, the voltage divided by the current gives the resistance of the load, in Ohms.
