To read erased pencil writing on paper, you can use techniques such as shining a bright light at an angle to create shadows that reveal indentations left in the paper. Alternatively, applying a soft pencil or a fine-tipped pen over the area can help highlight these indentations. Using a scanning app or software that enhances contrast may also make the erased text more visible.
Erased writing on paper can often be read using various techniques. One common method is to apply a light source at an angle to the paper, which may reveal indentations left by the writing. Another approach involves using chemical treatments to enhance the visibility of the residual marks. Additionally, digital imaging techniques, such as infrared or ultraviolet light, can help uncover erased text by highlighting differences in the paper's surface or composition.
Post-writing is what you do after you have all your ideas on your paper. It is what you do afterwards to make you writing as clear to read as possible.
Read from the paper
Handwriting helps you be a better reader if you can read a friends paper and be able to understand it, it helps you be a better writer because you wan t someone else to be able to read your paper.
The pronoun for "my pencil" in the sentence "my pencil is broken" would be "it." In this case, "it" is a singular pronoun that replaces the noun "pencil" to avoid repetition in the sentence. Pronouns like "it" help make sentences more concise and easier to read by referring back to a previously mentioned noun.
Erased writing on paper can often be read using various techniques. One common method is to apply a light source at an angle to the paper, which may reveal indentations left by the writing. Another approach involves using chemical treatments to enhance the visibility of the residual marks. Additionally, digital imaging techniques, such as infrared or ultraviolet light, can help uncover erased text by highlighting differences in the paper's surface or composition.
No guarantee on this technique, but it's worked for me.It's based on the premise that there will be a slight indentation in the paper from the writing of the original pencil message.>> Turn the paper over, and lightly shade the area with a soft pencil. You might be able to make out what the writing on the opposite side was.>> Hold the reverse side up to a mirror and, you MAY even be able to read what had been blocked out.
Do a rubbing on the back of he photo using a piece of white paper and a pencil or crayon. Lay the white paper on the back of the picture and gently rub on top of what is written on the back of the picture. Do it gently increasing pressure til you see the writing on back. Do a rubbing on the back of he photo using a piece of white paper and a pencil or crayon. Lay the white paper on the back of the picture and gently rub on top of what is written on the back of the picture. Do it gently increasing pressure til you see the writing on back.
http://www.scribd.com/doc/51513037/16/Read-the-Contents-of-a-Burned-Sheet-of-Paper
Post-writing is what you do after you have all your ideas on your paper. It is what you do afterwards to make you writing as clear to read as possible.
Letter impressions on paper can be read by placing the paper on a soft surface, such as a towel, and using a pencil or crayon to gently rub over the back of the paper where the impressions are. This technique will help bring out the indentations of the letters, making them easier to read.
Using a pencil in an exam is generally acceptable, but it's always best to check the exam rules or with the invigilator. Pencil can be easily erased, which may be an issue if the exam requires permanent markings. If the exam needs to be scanned and processed electronically, pencil markings may not be read accurately.
Post-writing is what you do after you have all the ideas in your paper sorted out properly. The aim is to make your paper as clear and easy to read as possible, not necessarily correcting every grammatical error or spelling.
Rom
a pen or pencil
The type of ROM that can be erased by UV light is called a PROM (Programmable Read-Only Memory). PROM chips have fuse links that can be erased using UV light, allowing the chips to be reprogrammed.
Lead conducts eletricity so it is used in order to the computer could read it.