(Pulley) It is a wheel with a grooved rim for carrying a line that turns in a frame or block. When one end of the line is pulled a weight can be raised at the other end of the line
like a dictionary
A plural apostrophe doesn't look like anything. There's no such thing as a plural apostrophe.
like you study or look at it so much that you know it like the back of your hand.....u dont have to look at it to read it off
look
samuel
It looks like a wheel.
There should be a diagram of the pully path under the hood. Look for a pully that doesn't look like a logical place for a powered unit. It will be relatively small compared to the other pullies.
Check the alignment of your pully and also look for a cracked or broken pully.
look at your belts. the pully between your motor and the altenator. This is your water pump pully. The back end of the unit should be attached to your motor block.
A pully is something that has a pully circle and you can just pull on it to make the object move but if the object is heaver then you you need to put a movable pully so it is easier
wrap the belt around the pully to hold pully still
a flag pole is most like a pully
it's the pully,right next to the power steering pump pully,there are two pully's that look like a small school bell,they are in the middle.The one on the left is the tensioner.You need to get a socket that fits in there and pull it to the right,to get the slack.It's best to take the washer fluid/coolant box out for more room,it's only three little bolts. If your wanting to get right at the tensioner,unbolt the bell pully,and under it is the plate,it takes an allen key to get it off,and when the plate is removed you will get at the spring. Hope this helps.
Damage, play/wobble, squealing while in operation.
A pully is used to lift thing depending on how big the obJect is
It's located on the front of the engine. It's belt pully that isn't "driving" anything. It's just chillin' spinning freely..
B.S. Pully died on 1972-01-06.